Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D8F5/2G 2GB DDR2 667 ECC Fully Buffered server RAM

SKU CH-2C61-40NKC MPN KVR667D2D8F5/2G

2GB DDR2 667 ECC fully buffered server module with CL5 latency, 1.80V operation and a heat spreader

  • Capacity2GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on heavily loaded channels
  • 2 GB capacity extends memory headroom for legacy systems
  • DDR2 667 speed matches PC2 5300 platform requirements
  • Heat spreader aids thermal management during sustained operation

Capacity and Server Fit

This 2 GB DDR2 module targets administrators maintaining legacy servers that require fully buffered ECC memory. The dual-rank design delivers registered error correction for data integrity in multi-socket platforms. It is not suited for desktop boards that lack chipset support for fully buffered DIMMs or for systems needing higher density per slot.

Thermals and Power Draw

Operating at 1.80 V with an integrated heat spreader, the module runs cool under typical server workloads. The registered buffer adds minimal latency while stabilising the memory bus across multiple ranks. No active cooling is required beyond standard chassis airflow. Acoustic impact is negligible in rack environments.

Accessories and Software Impact

The heat spreader is the only bundled hardware; it improves thermal headroom without altering slot clearance. No configuration utilities, firmware tools or diagnostic software accompany the kit. Installation is limited to seating the 240-pin DIMM and enabling ECC in the system BIOS.

Kohokohdat

  • ECC protection guards data integrity in server workloads
  • Fully Buffered architecture stabilises signals on heavily loaded channels
  • 2 GB capacity extends memory headroom for legacy systems
  • DDR2 667 speed matches PC2 5300 platform requirements
  • Heat spreader aids thermal management during sustained operation

Tekniset tiedot

BrandKingston
SeriesValueRAM
ModelKVR667D2D8F5/2G
Capacity2GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
FeaturesDual Rank
Lähetyspaino0.07 kg
Pakkauksen mitat171 × 57 × 13 mm

Kysymyksiä tästä tuotteesta

How do I install this 240-pin DDR2 module and what step do people often miss?

Align the notch on the gold edge with the key in the slot, press firmly until both retaining clips click shut, and verify the system detects the full 2 GB at 667 MHz; the step often missed is seating the module evenly so both clips engage simultaneously.

What maintenance or replacement will this fully buffered ECC module need later?

No routine maintenance is required; if a memory test eventually reports uncorrectable errors the module must be replaced because DDR2 components are no longer produced.

What limit appears first under sustained load on this CL5 1.80 V kit?

The DDR2 667 bandwidth ceiling is reached before thermal throttling, so throughput plateaus at the rated 5300 MT/s transfer rate during prolonged workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.