NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Kingston Technology Corp.
A 1 GB dual-channel kit of 240-pin DDR2 667 ECC fully buffered server memory with heat spreaders
This 1GB kit contains two 512MB DDR2 667 modules built for server platforms that require ECC fully buffered memory. The 240-pin DIMMs operate at 1.80V with CL5 latency and include heat spreaders. It suits administrators maintaining legacy systems that specify PC2 5300 registered DIMMs.
Fully buffered architecture moves the memory buffer onto each module, reducing electrical loading on the motherboard during continuous operation. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute runs. The heat spreaders help dissipate the extra power drawn by the buffer chips under steady throughput.
Verify that your server board explicitly supports DDR2 fully buffered DIMMs at 667 MT/s and accepts 240-pin FB-DIMM slots. Confirm the system requires ECC registered memory rather than unbuffered or standard registered modules. Ensure the BIOS can initialise a dual-channel pair of 512MB density sticks.
| Brand | Kingston |
|---|---|
| Model | KVR667D2S8F5K2/1G |
| Capacity | 1GB (2 x 512MB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Heat Spreader | Yes |
| Sūtījuma svars | 0.09 kg |
| Sūtījuma izmēri | 173 × 94 × 15 mm |
The modules run at the standard DDR2 1.80 V with a heat spreader on each DIMM, so power draw and thermals stay within normal server DDR2 limits during continuous operation.
A server motherboard with 240-pin DDR2 slots that support fully-buffered ECC memory at PC2 5300 speed.
All modules must be fully-buffered ECC DDR2 at the same voltage; mixing with unbuffered or registered DDR2 will prevent the system from booting.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?