NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
A 1 GB dual-channel kit of 240-pin DDR2 667 ECC fully buffered server memory with heat spreaders
This 1GB kit contains two 512MB DDR2 667 modules built for server platforms that require ECC fully buffered memory. The 240-pin DIMMs operate at 1.80V with CL5 latency and include heat spreaders. It suits administrators maintaining legacy systems that specify PC2 5300 registered DIMMs.
Fully buffered architecture moves the memory buffer onto each module, reducing electrical loading on the motherboard during continuous operation. ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute runs. The heat spreaders help dissipate the extra power drawn by the buffer chips under steady throughput.
Verify that your server board explicitly supports DDR2 fully buffered DIMMs at 667 MT/s and accepts 240-pin FB-DIMM slots. Confirm the system requires ECC registered memory rather than unbuffered or standard registered modules. Ensure the BIOS can initialise a dual-channel pair of 512MB density sticks.
| Brand | Kingston |
|---|---|
| Model | KVR667D2S8F5K2/1G |
| Capacity | 1GB (2 x 512MB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Heat Spreader | Yes |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 173 × 94 × 15 mm |
The modules run at the standard DDR2 1.80 V with a heat spreader on each DIMM, so power draw and thermals stay within normal server DDR2 limits during continuous operation.
A server motherboard with 240-pin DDR2 slots that support fully-buffered ECC memory at PC2 5300 speed.
All modules must be fully-buffered ECC DDR2 at the same voltage; mixing with unbuffered or registered DDR2 will prevent the system from booting.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?