iDsonix USB3.0-A-1m SATA to USB 3.0 converter cable 1m
- Black
- USB 3.0
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Link Depot Corp.
80mm ball-bearing case fan delivers 38.2 CFM at 3000 RPM with 32.1 dBA noise over a 3-pin connector
This 80 by 80 by 25 millimetre fan fits small chassis and restricted mounting points where larger rotors cannot be installed. It delivers 38.2 CFM at 3000 RPM using a ball bearing for durable operation. The unit ships new in black with a single three‑pin power connector.
The three‑pin connector relies on motherboard voltage regulation rather than PWM signalling, so minimum speed and fine‑grained curves depend on the board implementation. At full voltage the fan runs at a fixed 3000 RPM producing 32.1 dBA. Builders who need quieter idle or software‑defined curves should verify their header capabilities.
Ensure the case provides 80mm screw holes with 25mm clearance for the frame thickness. Confirm the motherboard offers a three‑pin fan header; a four‑pin header will work but will not add PWM control. The fan includes no controller, so speed management is handled entirely by the system firmware.
| Brand | Link Depot |
|---|---|
| Model | FAN-8025-B |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 80mm |
| Fan Thickness | 25mm |
| Bearing Type | Ball |
| RPM | 3000 RPM |
| Air Flow | 38.2 CFM |
| Noise Level | 32.1 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Dimensions | 80 x 80 x 25mm |
| Sūtījuma svars | 0.06 kg |
| Sūtījuma izmēri | 185 × 132 × 28 mm |
This model is an 80mm by 25mm fan; verify your case has an 80mm mounting location before ordering.
At 3000 RPM the fan moves 38.2 CFM of air through an 80mm frame, giving strong spot cooling for tight spaces or GPU heatsinks.
A 3-pin connector allows voltage-based speed control but not PWM; the motherboard can still lower RPM by reducing voltage.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?