Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black USB-C GaN power adapter with short attached cable

LORDWORLD

LORDWORLD 27W USB-C PD Power Supply 5.1V 5A GaN Black

SKU CH-FA5B-2V1H6

A 27 W USB-C PD supply delivering 5.1 V at 5 A for Raspberry Pi 5, with GaN efficiency and full protection

  • GaN tech keeps the Pi 5 running without hangs
  • 27 W output at 5.1 V 5 A meets peak demand
  • PD 3.0 compliance enables 9 V, 12 V, 15 V profiles
  • 120 mm 18 AWG cable reaches the board easily
  • Over-voltage, over-current and short-circuit protection built in

Raspberry Pi 5 USB-C PD supply

This 27W GaN power supply delivers the 5.1V 5A output that Raspberry Pi 5 boards require for stable operation. It accepts 100 to 240V AC at 50 or 60Hz with a maximum draw of 0.8A. The unit includes a 120mm 18AWG USB-C cable and is finished in black.

PD voltage steps and cable limit

The charger negotiates 5.1V at 5A, 9V at 3A, 12V at 2.25A and 15V at 1.8A over USB Power Delivery. The fixed 120mm cable restricts placement to very close to the socket or board, so builders needing longer runs must add a separate USB-C extension.

Replaces the official 27W white supply

Owners of the original Raspberry Pi 5 27W USB-C adapter gain a more compact GaN design and a black finish that hides dust better. The upgrade is worthwhile when the shorter cable length is acceptable and a smaller wall footprint is preferred.

Priekšrocības

  • GaN tech keeps the Pi 5 running without hangs
  • 27 W output at 5.1 V 5 A meets peak demand
  • PD 3.0 compliance enables 9 V, 12 V, 15 V profiles
  • 120 mm 18 AWG cable reaches the board easily
  • Over-voltage, over-current and short-circuit protection built in

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Which voltage setting should I pick for a Raspberry Pi 5?

Use the 5.1V 5A profile; it delivers the 27W the board expects.

What does the 27W rating mean when the Pi 5 is under load?

It means the supply can sustain 5.1V at 5A continuously, so the Pi 5 gets full performance without throttling.

How does the USB-C PD handshake limit the output?

The charger negotiates 5.1V/5A, 9V/3A, 12V/2.25A or 15V/1.8A; the Pi 5 selects the 5.1V 5A contract.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.