Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with silver shielded module and pin headers

LORDWORLD

LORDWORLD ESP32-C5 development board 240MHz

SKU CH-H1PZ-MJPEH

A RISC-V development board with dual-band Wi-Fi 6, Bluetooth 5, Zigbee 3.0 and Thread for multi-protocol IoT projects

  • RISC-V MCU at 240 MHz powers efficient IoT designs
  • Dual-band Wi-Fi 6 on 2.4 and 5 GHz bands
  • Bluetooth 5 LE enables low-energy peripheral links
  • IEEE 802.15.4 radio supports Zigbee 3.0 and Thread
  • ESP-IDF and Arduino IDE toolchains accelerate development start

ESP32-C5 RISC-V development board

This LORDWORLD board carries the ESP32-C5-WROOM-1 module with a 240 MHz RISC-V core. It is aimed at engineers and hobbyists building IoT endpoints that need dual-band Wi-Fi 6 and Bluetooth 5 connectivity. The board supports ESP-IDF and Arduino IDE tool-chains and ships with SDKs, tutorials and example projects.

Makers adding Wi-Fi 6 and Thread to sensors

Suited for developers who want 2.4 GHz and 5 GHz Wi-Fi 6 plus IEEE 802.15.4 radio for Zigbee 3.0 or Thread networks. Not for projects that require wired Ethernet, cellular links or higher transmit power than the onboard radio provides. Buyers needing more GPIO pins or on-board storage should look at larger modules.

Handles typical smart-home and sensor nodes

The 240 MHz core and integrated 2.4 GHz and 5 GHz radios comfortably run MQTT, Matter or Thread stacks for home-automation nodes. Memory and flash headroom become tight when hosting a local web server, OTA buffers and multiple crypto contexts simultaneously. Applications with heavy graphics or video streaming will exceed the available resources.

Priekšrocības

  • RISC-V MCU at 240 MHz powers efficient IoT designs
  • Dual-band Wi-Fi 6 on 2.4 and 5 GHz bands
  • Bluetooth 5 LE enables low-energy peripheral links
  • IEEE 802.15.4 radio supports Zigbee 3.0 and Thread
  • ESP-IDF and Arduino IDE toolchains accelerate development start

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Which computer interface do I need to program the ESP32-C5 board?

Connect the board to a computer USB port and use ESP-IDF or Arduino IDE to flash firmware.

Will the 2.4 GHz radio interfere with my existing Zigbee 3.0 sensors?

The board uses IEEE 802.15.4 for Zigbee 3.0 and Thread, so it can coexist with other 2.4 GHz devices on separate channels.

How can I verify the Wi-Fi 6 connection is active after setup?

Check the serial monitor for a 2.4 GHz or 5 GHz association message and confirm an IP address is assigned.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.