暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with silver shielded module and pin headers

LORDWORLD

LORDWORLD ESP32-C5 development board 240MHz

SKU CH-H1PZ-MJPEH

A RISC-V development board with dual-band Wi-Fi 6, Bluetooth 5, Zigbee 3.0 and Thread for multi-protocol IoT projects

  • RISC-V MCU at 240 MHz powers efficient IoT designs
  • Dual-band Wi-Fi 6 on 2.4 and 5 GHz bands
  • Bluetooth 5 LE enables low-energy peripheral links
  • IEEE 802.15.4 radio supports Zigbee 3.0 and Thread
  • ESP-IDF and Arduino IDE toolchains accelerate development start

ESP32-C5 RISC-V development board

This LORDWORLD board carries the ESP32-C5-WROOM-1 module with a 240 MHz RISC-V core. It is aimed at engineers and hobbyists building IoT endpoints that need dual-band Wi-Fi 6 and Bluetooth 5 connectivity. The board supports ESP-IDF and Arduino IDE tool-chains and ships with SDKs, tutorials and example projects.

Makers adding Wi-Fi 6 and Thread to sensors

Suited for developers who want 2.4 GHz and 5 GHz Wi-Fi 6 plus IEEE 802.15.4 radio for Zigbee 3.0 or Thread networks. Not for projects that require wired Ethernet, cellular links or higher transmit power than the onboard radio provides. Buyers needing more GPIO pins or on-board storage should look at larger modules.

Handles typical smart-home and sensor nodes

The 240 MHz core and integrated 2.4 GHz and 5 GHz radios comfortably run MQTT, Matter or Thread stacks for home-automation nodes. Memory and flash headroom become tight when hosting a local web server, OTA buffers and multiple crypto contexts simultaneously. Applications with heavy graphics or video streaming will exceed the available resources.

特長

  • RISC-V MCU at 240 MHz powers efficient IoT designs
  • Dual-band Wi-Fi 6 on 2.4 and 5 GHz bands
  • Bluetooth 5 LE enables low-energy peripheral links
  • IEEE 802.15.4 radio supports Zigbee 3.0 and Thread
  • ESP-IDF and Arduino IDE toolchains accelerate development start

仕様

BrandLORDWORLD

この商品に関する質問

Which computer interface do I need to program the ESP32-C5 board?

Connect the board to a computer USB port and use ESP-IDF or Arduino IDE to flash firmware.

Will the 2.4 GHz radio interfere with my existing Zigbee 3.0 sensors?

The board uses IEEE 802.15.4 for Zigbee 3.0 and Thread, so it can coexist with other 2.4 GHz devices on separate channels.

How can I verify the Wi-Fi 6 connection is active after setup?

Check the serial monitor for a 2.4 GHz or 5 GHz association message and confirm an IP address is assigned.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。