Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small green circuit board with silver USB-C port and metal shielded module

LORDWORLD

LORDWORLD ESP32-C5 development board 32MB Flash 8MB PSRAM

SKU CH-TMBD-QZJCE

A dual-band Wi-Fi 6 and Bluetooth 5 development board with 32 MB flash, 8 MB PSRAM, and a 240 MHz RISC-V MCU for IoT edge projects

  • Dual-band Wi-Fi 6 reaches both 2.4 GHz and 5 GHz networks
  • RISC-V MCU runs at 240 MHz for fast IoT processing
  • 32 MB flash plus 8 MB PSRAM stores large firmware and buffers
  • Bluetooth 5 LE with IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh
  • USB Type-C port simplifies power and programming connections

ESP32-C5 RISC-V development board

The LORDWORLD board integrates an ESP32-C5-WROOM-1 module with 32MB flash and 8MB PSRAM. It runs a 240MHz RISC-V core and supports ESP-IDF and Arduino IDE workflows. A USB Type-C port provides power and programming access.

IoT engineers needing multi-protocol wireless

Makers building Matter, Zigbee 3.0 or Thread devices benefit from the integrated 2.4GHz and 5GHz radios alongside Bluetooth 5 LE. Projects that require only basic Wi-Fi connectivity without 802.15.4 support may not need this feature set.

Dual-band Wi-Fi 6 with 802.15.4 radio

The single specification that decides fit is the combined 2.4GHz and 5GHz Wi-Fi 6 plus IEEE 802.15.4 interface for Zigbee and Thread. If your application does not use 5GHz Wi-Fi or 802.15.4 mesh protocols, a simpler module could suffice.

Priekšrocības

  • Dual-band Wi-Fi 6 reaches both 2.4 GHz and 5 GHz networks
  • RISC-V MCU runs at 240 MHz for fast IoT processing
  • 32 MB flash plus 8 MB PSRAM stores large firmware and buffers
  • Bluetooth 5 LE with IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh
  • USB Type-C port simplifies power and programming connections

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

What comes in the box with the LORDWORLD ESP32-C5 board and what must be purchased separately?

The board includes an onboard ESP32-C5-WROOM-1 module with 32MB Flash and 8MB PSRAM, a USB Type-C port for power and programming, and a built-in antenna for wireless. A USB Type-C cable and any external sensors or actuators are not included.

Which wireless protocols does the ESP32-C5-WROOM-1 module on this board support for my IoT project?

The module supports dual-band Wi-Fi 6 on 2.4GHz and 5GHz, Bluetooth 5 (LE), and IEEE 802.15.4 for Zigbee 3.0 and Thread, enabling multi-protocol connectivity.

How does the 240MHz RISC-V MCU perform when running ESP-IDF or Arduino IDE projects with Wi-Fi 6 active?

The 240MHz RISC-V processor handles ESP-IDF and Arduino IDE workloads while the integrated radio manages dual-band Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 traffic for responsive IoT edge applications.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.