Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small green circuit board with silver USB-C port and metal shielded module

LORDWORLD

LORDWORLD ESP32-C5 development board 32MB Flash 8MB PSRAM

SKU CH-TMBD-QZJCE

A dual-band Wi-Fi 6 and Bluetooth 5 development board with 32 MB flash, 8 MB PSRAM, and a 240 MHz RISC-V MCU for IoT edge projects

  • Dual-band Wi-Fi 6 reaches both 2.4 GHz and 5 GHz networks
  • RISC-V MCU runs at 240 MHz for fast IoT processing
  • 32 MB flash plus 8 MB PSRAM stores large firmware and buffers
  • Bluetooth 5 LE with IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh
  • USB Type-C port simplifies power and programming connections

ESP32-C5 RISC-V development board

The LORDWORLD board integrates an ESP32-C5-WROOM-1 module with 32MB flash and 8MB PSRAM. It runs a 240MHz RISC-V core and supports ESP-IDF and Arduino IDE workflows. A USB Type-C port provides power and programming access.

IoT engineers needing multi-protocol wireless

Makers building Matter, Zigbee 3.0 or Thread devices benefit from the integrated 2.4GHz and 5GHz radios alongside Bluetooth 5 LE. Projects that require only basic Wi-Fi connectivity without 802.15.4 support may not need this feature set.

Dual-band Wi-Fi 6 with 802.15.4 radio

The single specification that decides fit is the combined 2.4GHz and 5GHz Wi-Fi 6 plus IEEE 802.15.4 interface for Zigbee and Thread. If your application does not use 5GHz Wi-Fi or 802.15.4 mesh protocols, a simpler module could suffice.

Helstu kostir

  • Dual-band Wi-Fi 6 reaches both 2.4 GHz and 5 GHz networks
  • RISC-V MCU runs at 240 MHz for fast IoT processing
  • 32 MB flash plus 8 MB PSRAM stores large firmware and buffers
  • Bluetooth 5 LE with IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh
  • USB Type-C port simplifies power and programming connections

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

What comes in the box with the LORDWORLD ESP32-C5 board and what must be purchased separately?

The board includes an onboard ESP32-C5-WROOM-1 module with 32MB Flash and 8MB PSRAM, a USB Type-C port for power and programming, and a built-in antenna for wireless. A USB Type-C cable and any external sensors or actuators are not included.

Which wireless protocols does the ESP32-C5-WROOM-1 module on this board support for my IoT project?

The module supports dual-band Wi-Fi 6 on 2.4GHz and 5GHz, Bluetooth 5 (LE), and IEEE 802.15.4 for Zigbee 3.0 and Thread, enabling multi-protocol connectivity.

How does the 240MHz RISC-V MCU perform when running ESP-IDF or Arduino IDE projects with Wi-Fi 6 active?

The 240MHz RISC-V processor handles ESP-IDF and Arduino IDE workloads while the integrated radio manages dual-band Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 traffic for responsive IoT edge applications.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.