Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Thin black cable with silver SlimSAS 4i connectors at both ends

LORDWORLD

LORDWORLD SlimSAS 4i SFF-8654 to SlimSAS 4i SFF-8654 Cable 0.5M

SKU CH-VTV8-BQAEV

0.5 m SlimSAS 4i SFF-8654 cable links NVMe or Tri-mode HBA and RAID cards at PCIe 4.0 speeds with SFF-9402 compliant construction and UL 20744 certification

  • 5 m cable keeps NVMe signal paths short for PCIe 4.0 speeds
  • SFF-8654 connectors meet SFF-8654 design specifications for reliable mating
  • SFF-9402 compliant design works with mainstream NVMe Tri-mode HBA RAID cards
  • UL 20744 certification confirms cable meets safety requirements
  • 69 inch length fits tight server chassis without excess slack

LORDWORLD SlimSAS 4i SFF-8654 Cable

The LORDWORLD SlimSAS cable connects two SFF-8654 4i ports over a 0.5 metre length. It is built for linking NVMe or Tri-mode HBA and RAID controllers to backplanes or drives inside servers and workstations. Connectors follow the SFF-8654 design specification and the assembly meets SFF-9402 cable design requirements. The cable carries UL20744 certification for safety compliance.

Suits builds needing a short.

This half-metre cable fits tight chassis routing between adjacent controllers and backplanes. It is not for installations that need longer reach or right-angle connector orientation. Builders using connector families other than SFF-8654 4i should look at a different cable.

PCIe 4.0 transfer speed over SFF-8654

The cable is specified to meet PCIe 4.0 transfer speeds across the SFF-8654 interface. This single rating determines whether the link can saturate the attached NVMe devices. If the controller or backplane operates at a different PCIe generation, the cable will still function but the system will negotiate the lowest common speed.

Priekšrocības

  • 5 m cable keeps NVMe signal paths short for PCIe 4.0 speeds
  • SFF-8654 connectors meet SFF-8654 design specifications for reliable mating
  • SFF-9402 compliant design works with mainstream NVMe Tri-mode HBA RAID cards
  • UL 20744 certification confirms cable meets safety requirements
  • 69 inch length fits tight server chassis without excess slack

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

How do I route the 0.5 m SFF-8654 cable inside a dense server chassis without bending it too sharply?

Keep the bend radius gentle — at least five times the cable diameter — and use the 19.69 inch length to follow the chassis cable-management channels rather than forcing a tight corner.

Will the UL20744 jacket degrade or need periodic replacement in a hot rack?

The UL20744 rating covers the cable’s fire and temperature safety limits; under normal rack temperatures it does not require scheduled replacement.

At what point does sustained PCIe 4.0 traffic hit a bottleneck on this 0.5 m link?

The 0.5 meter SFF-9402 design is validated for PCIe 4.0 signal integrity, so the practical limit is the controller or drive, not the cable itself.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.