Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Thin black cable with silver SlimSAS 4i connectors at both ends

LORDWORLD

LORDWORLD SlimSAS 4i SFF-8654 to SlimSAS 4i SFF-8654 Cable 0.5M

SKU CH-VTV8-BQAEV

0.5 m SlimSAS 4i SFF-8654 cable links NVMe or Tri-mode HBA and RAID cards at PCIe 4.0 speeds with SFF-9402 compliant construction and UL 20744 certification

  • 5 m cable keeps NVMe signal paths short for PCIe 4.0 speeds
  • SFF-8654 connectors meet SFF-8654 design specifications for reliable mating
  • SFF-9402 compliant design works with mainstream NVMe Tri-mode HBA RAID cards
  • UL 20744 certification confirms cable meets safety requirements
  • 69 inch length fits tight server chassis without excess slack

LORDWORLD SlimSAS 4i SFF-8654 Cable

The LORDWORLD SlimSAS cable connects two SFF-8654 4i ports over a 0.5 metre length. It is built for linking NVMe or Tri-mode HBA and RAID controllers to backplanes or drives inside servers and workstations. Connectors follow the SFF-8654 design specification and the assembly meets SFF-9402 cable design requirements. The cable carries UL20744 certification for safety compliance.

Suits builds needing a short.

This half-metre cable fits tight chassis routing between adjacent controllers and backplanes. It is not for installations that need longer reach or right-angle connector orientation. Builders using connector families other than SFF-8654 4i should look at a different cable.

PCIe 4.0 transfer speed over SFF-8654

The cable is specified to meet PCIe 4.0 transfer speeds across the SFF-8654 interface. This single rating determines whether the link can saturate the attached NVMe devices. If the controller or backplane operates at a different PCIe generation, the cable will still function but the system will negotiate the lowest common speed.

Poudarki

  • 5 m cable keeps NVMe signal paths short for PCIe 4.0 speeds
  • SFF-8654 connectors meet SFF-8654 design specifications for reliable mating
  • SFF-9402 compliant design works with mainstream NVMe Tri-mode HBA RAID cards
  • UL 20744 certification confirms cable meets safety requirements
  • 69 inch length fits tight server chassis without excess slack

Specifikacije

BrandLORDWORLD

Vprašanja o tem izdelku

How do I route the 0.5 m SFF-8654 cable inside a dense server chassis without bending it too sharply?

Keep the bend radius gentle — at least five times the cable diameter — and use the 19.69 inch length to follow the chassis cable-management channels rather than forcing a tight corner.

Will the UL20744 jacket degrade or need periodic replacement in a hot rack?

The UL20744 rating covers the cable’s fire and temperature safety limits; under normal rack temperatures it does not require scheduled replacement.

At what point does sustained PCIe 4.0 traffic hit a bottleneck on this 0.5 m link?

The 0.5 meter SFF-9402 design is validated for PCIe 4.0 signal integrity, so the practical limit is the controller or drive, not the cable itself.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.