Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Metallic enclosure for one M.2 NVMe SSD, fits 3.5 bay, Mini-SAS HD port, key lock

LORDWORLD

LORDWORLD ToughArmor MB833M2K-B M.2 NVMe SSD Mobile Rack Enclosure 3.5 Bay Mini-SAS HD 64 Gbps

SKU CH-R40P-VGDVX

Holds one M.2 NVMe SSD in lengths from 30 mm to 110 mm, mounts in a 3.5-inch bay, and connects through a Mini-SAS HD port for full 64 Gbps bandwidth with a key lock

  • Accepts M.2 NVMe SSDs from 30 mm to 110 mm
  • Fits any standard external 3.5-inch drive bay
  • Connects via Mini-SAS HD SFF-8643 for NVMe host
  • Delivers full 64 Gbps NVMe bandwidth
  • Two-segment key lock adds physical security

Removable NVMe SSD carrier for 3.5 bays

The LORDWORLD ToughArmor MB833M2K-B accepts a single M.2 NVMe SSD in lengths from 30 mm (2230) up to 110 mm (22110) and mounts in any standard external 3.5 device bay. A Mini-SAS HD (SFF-8643) port carries the PCIe 3.0 or 4.0 link to an NVMe host, delivering the full 64 Gbps bandwidth. A two-segment key lock secures the drive against unauthorised removal.

Suits builders who want hot-swap NVMe storage

This enclosure is designed for systems that provide an NVMe-capable host connection through a Mini-SAS HD cable. It will not work for platforms that lack an NVMe host link or that cannot route PCIe signals to the bay. The key lock adds physical security for shared or public workstations.

Mini-SAS HD (SFF-8643) host interface requirement

The carrier connects exclusively through a Mini-SAS HD port wired for NVMe; without that specific host connection the SSD will not be detected. Verify your motherboard, HBA or backplane supplies an NVMe Mini-SAS HD header before purchasing.

Priekšrocības

  • Accepts M.2 NVMe SSDs from 30 mm to 110 mm
  • Fits any standard external 3.5-inch drive bay
  • Connects via Mini-SAS HD SFF-8643 for NVMe host
  • Delivers full 64 Gbps NVMe bandwidth
  • Two-segment key lock adds physical security

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Will the MB833M2K-B work with an older PCIe 3.0 NVMe host card?

Yes, the enclosure supports both PCIe 3.0 and 4.0 NVMe SSDs, so it will operate at the host's maximum speed.

How can I confirm the MB833M2K-B is delivering the full 64 Gbps bandwidth?

Check your operating system's drive properties or benchmark tool; it should report a PCIe 4.0 x4 link when a compatible SSD and host are used.

Does the MB833M2K-B package include a Mini-SAS HD (SFF-8643) cable or must I buy one separately?

The enclosure installs into a 3.5" bay and connects via its built-in Mini-SAS HD port; a compatible SFF-8643 cable is not included and must be purchased separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.