Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green Raspberry Pi Pico RP2040 boards side by side

MCDODO

MCDODO 2Pcs Raspberry Pi Pico RP2040 Development Board

SKU CH-KJ5B-V7TCE

Twin RP2040 boards run at 133 MHz with 264 KB SRAM, 2 MB flash, 30 GPIO and USB 1.1 for C/C++ or MicroPython projects

  • TypeSingle Board Computers
  • Two boards included for parallel projects or backups
  • Dual-core ARM Cortex-M0+ at up to 133 MHz for responsive real-time tasks
  • 2 MB on-board flash plus 264 KB SRAM for code and data storage
  • 30 GPIO pins with 12-bit ADC, PWM, SPI, I2C and UART for sensor and actuator interfacing
  • USB 1.1 device support enables drag-and-drop programming from Windows, macOS or Linux

Dual-board RP2040 kit for IoT learners

This pack contains two Raspberry Pi Pico development boards built around the RP2040 dual-core ARM Cortex-M0+ microcontroller. Each board runs at up to 133 MHz and includes 264 KB of SRAM plus 2 MB of on-board Quad SPI flash. The pair is suited to hobbyists, students and engineers who want a spare unit for parallel experiments or permanent deployment.

30 GPIO pins with analogue and serial interfaces

Every board exposes 30 GPIO pins, including four analogue inputs and 26 multi-function pins. You also get two SPI, two I2C and two UART peripherals, three 12-bit ADC channels and 16 controllable PWM outputs. USB 1.1 device support is provided for programming and power, while a dedicated QSPI bus allows up to 16 MB of off-chip flash if the project grows.

Steady 133 MHz operation with C/C++ or MicroPython

The RP2040 sustains its maximum 133 MHz clock during long-running control loops or data-logging tasks without thermal throttling. Development can use the official C/C++ SDK or MicroPython, both supported on Windows, macOS and Debian-based Linux including Raspberry Pi OS. Dual-core scheduling lets one core handle timing-critical I/O while the other manages communications or file storage.

Priekšrocības

  • Two boards included for parallel projects or backups
  • Dual-core ARM Cortex-M0+ at up to 133 MHz for responsive real-time tasks
  • 2 MB on-board flash plus 264 KB SRAM for code and data storage
  • 30 GPIO pins with 12-bit ADC, PWM, SPI, I2C and UART for sensor and actuator interfacing
  • USB 1.1 device support enables drag-and-drop programming from Windows, macOS or Linux

Specifikācijas

TypeSingle Board Computers

Jautājumi par šo preci

What does the 133 MHz dual-core ARM Cortex-M0+ processor mean for real-world projects?

The RP2040 runs up to 133 MHz with two cores, giving enough speed for sensor reading, motor control and MicroPython scripts without lag.

What does USB 1.1 support cap in practice?

USB 1.1 limits the programming and power port to low-speed or full-speed signalling, so high-bandwidth streaming is not possible.

How many GPIO pins does each board expose for sensors and actuators?

Each board provides 30 GPIO pins, including four analog-capable inputs and 26 multi-function pins with PWM, SPI, I2C and UART.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.