Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green Raspberry Pi Pico RP2040 boards side by side

MCDODO

MCDODO 2Pcs Raspberry Pi Pico RP2040 Development Board

SKU CH-KJ5B-V7TCE

Twin RP2040 boards run at 133 MHz with 264 KB SRAM, 2 MB flash, 30 GPIO and USB 1.1 for C/C++ or MicroPython projects

  • TypeSingle Board Computers
  • Two boards included for parallel projects or backups
  • Dual-core ARM Cortex-M0+ at up to 133 MHz for responsive real-time tasks
  • 2 MB on-board flash plus 264 KB SRAM for code and data storage
  • 30 GPIO pins with 12-bit ADC, PWM, SPI, I2C and UART for sensor and actuator interfacing
  • USB 1.1 device support enables drag-and-drop programming from Windows, macOS or Linux

Dual-board RP2040 kit for IoT learners

This pack contains two Raspberry Pi Pico development boards built around the RP2040 dual-core ARM Cortex-M0+ microcontroller. Each board runs at up to 133 MHz and includes 264 KB of SRAM plus 2 MB of on-board Quad SPI flash. The pair is suited to hobbyists, students and engineers who want a spare unit for parallel experiments or permanent deployment.

30 GPIO pins with analogue and serial interfaces

Every board exposes 30 GPIO pins, including four analogue inputs and 26 multi-function pins. You also get two SPI, two I2C and two UART peripherals, three 12-bit ADC channels and 16 controllable PWM outputs. USB 1.1 device support is provided for programming and power, while a dedicated QSPI bus allows up to 16 MB of off-chip flash if the project grows.

Steady 133 MHz operation with C/C++ or MicroPython

The RP2040 sustains its maximum 133 MHz clock during long-running control loops or data-logging tasks without thermal throttling. Development can use the official C/C++ SDK or MicroPython, both supported on Windows, macOS and Debian-based Linux including Raspberry Pi OS. Dual-core scheduling lets one core handle timing-critical I/O while the other manages communications or file storage.

Høydepunkter

  • Two boards included for parallel projects or backups
  • Dual-core ARM Cortex-M0+ at up to 133 MHz for responsive real-time tasks
  • 2 MB on-board flash plus 264 KB SRAM for code and data storage
  • 30 GPIO pins with 12-bit ADC, PWM, SPI, I2C and UART for sensor and actuator interfacing
  • USB 1.1 device support enables drag-and-drop programming from Windows, macOS or Linux

Spesifikasjoner

TypeSingle Board Computers

Spørsmål om denne varen

What does the 133 MHz dual-core ARM Cortex-M0+ processor mean for real-world projects?

The RP2040 runs up to 133 MHz with two cores, giving enough speed for sensor reading, motor control and MicroPython scripts without lag.

What does USB 1.1 support cap in practice?

USB 1.1 limits the programming and power port to low-speed or full-speed signalling, so high-bandwidth streaming is not possible.

How many GPIO pins does each board expose for sensors and actuators?

Each board provides 30 GPIO pins, including four analog-capable inputs and 26 multi-function pins with PWM, SPI, I2C and UART.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.