Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small green circuit board camera module with gold connector and lens assembly

MCDODO

MCDODO 64MP Hawkeye Autofocus Camera Module for Raspberry Pi

SKU CH-T5A9-8QW04

Captures 64MP stills at 9152 x 6944 with autofocus and works on every Raspberry Pi board

  • TypeSingle Board Computers
  • 64 MP resolution captures 9152 × 6944 still images
  • Built-in autofocus motor enables fast infinite focus and 10× digital zoom
  • Manual focus adjustable through software control
  • MIPI CSI-2 interface fits every Raspberry Pi board with libcamera on Bullseye
  • Pre-compiled program lets beginners access the camera immediately

64MP Hawkeye Camera Module

The 64MP Hawkeye module adds a 64 megapixel Arducam sensor to any Raspberry Pi board with a MIPI CSI-2 connector. It captures still images at 9152 x 6944 resolution and works with Pi 5, 4B, 3B+, 3B, 2B, A+, Zero, W and Zero WH running the libcamera stack on Bullseye. A pre-compiled program lets newcomers access the camera without writing code.

Sustained Autofocus and Zoom Behaviour

The built-in autofocus motor continuously adjusts focus from close-up to infinity, keeping subjects sharp during extended recording sessions. Up to 10x digital zoom is available without mechanical movement, so image quality degrades only by cropping rather than lens shift. Manual focus can be overridden through software when a fixed focal plane is preferred.

MIPI CSI-2 Interface Practical Limits

The module uses the standard MIPI CSI-2 ribbon interface common to all supported Pi boards, so no extra GPIO pins are consumed. Bandwidth is shared with any other CSI device, meaning only one camera can stream at full 64MP resolution at a time. Cable length and shielding affect signal integrity, so extensions beyond the supplied ribbon may reduce maximum frame rates.

Priekšrocības

  • 64 MP resolution captures 9152 × 6944 still images
  • Built-in autofocus motor enables fast infinite focus and 10× digital zoom
  • Manual focus adjustable through software control
  • MIPI CSI-2 interface fits every Raspberry Pi board with libcamera on Bullseye
  • Pre-compiled program lets beginners access the camera immediately

Specifikācijas

TypeSingle Board Computers

Jautājumi par šo preci

How much power does the 64MP Hawkeye camera draw when recording continuously all day?

The module draws power directly from the Raspberry Pi CSI-2 port; the Pi’s 5 V rail supplies both the sensor and the autofocus motor, so no separate power adapter is required.

Which Raspberry Pi boards and software does the 64MP Hawkeye need to function?

It connects via MIPI CSI-2 to any Pi 5, 4B, 3B+, 3B, 2B, A+, Zero, Zero W or Zero WH running Raspberry Pi OS Bullseye with the libcamera stack.

Will the 64MP Hawkeye work with my original Raspberry Pi Camera V1 mounting holes and enclosures?

Yes, the board shares the same footprint and mounting points as the official Camera Module 3, V2 and V1, so existing cases, tripod adapters and pan-tilt brackets fit without modification.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.