Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with two M.2 slots and gold edge connector

MCDODO

MCDODO X1004Support Dual M.2 NVMe HAT for Raspberry Pi 5

SKU CH-2Q5T-TKXYY MPN X1004Support

Adds two M.2 NVMe 2280 SSDs with independent 3.3 V 3.5 A power to Raspberry Pi 5 for boot and storage

  • TypeSingle Board Computers
  • Dual independent power supplies deliver up to 3.5 A per SSD
  • Supports two M.2 2280 NVMe drives plus 2230 or 2242 sizes
  • Boots Raspberry Pi 5 directly from NVMe with 2024-05-17 bootloader
  • Compatible with all Raspberry Pi 5 capacities from 2 GB to 16 GB
  • Fits P579 case versions V2, V3 and V4 or later

M.2 HAT for Raspberry Pi 5

The MCDODO X1004Support is a PCIe to dual M.2 HAT that adds two NVMe SSD slots to a Raspberry Pi 5. It fits the 2GB, 4GB, 8GB and 16GB board variants. Two dedicated DC/DC converters supply 3.3V at up to 3.5A to each drive for stable operation. The package includes the expansion board and an accessory pack.

Makers expanding Pi 5 storage

This HAT suits builders who want to run the operating system or heavy workloads from fast NVMe storage on a Pi 5. It accepts 2280-length drives and shorter 2230 or 2242 modules with an extender. Builders using a case other than the P579-V2, V3 or V4, or those needing a single-drive solution, should look at something else.

Dual NVMe slots with independent power

The deciding specification is the pair of M.2 Key-M slots fed by separate 3.3V step-down converters rated for 3.5A each. This architecture lets two SSDs run at full speed simultaneously without sharing a single power budget. Boot support requires the Pi 5 bootloader dated 2024-05-17 or later.

Priekšrocības

  • Dual independent power supplies deliver up to 3.5 A per SSD
  • Supports two M.2 2280 NVMe drives plus 2230 or 2242 sizes
  • Boots Raspberry Pi 5 directly from NVMe with 2024-05-17 bootloader
  • Compatible with all Raspberry Pi 5 capacities from 2 GB to 16 GB
  • Fits P579 case versions V2, V3 and V4 or later

Specifikācijas

TypeSingle Board Computers

Jautājumi par šo preci

What comes in the box and what must I supply separately?

The pack includes the X1004 expansion board and an accessory kit. You must provide a Raspberry Pi 5, one or two M.2 2280 NVMe SSDs, a power adapter and any active cooler or AI module you need.

Which Raspberry Pi 5 memory versions work with this HAT?

The board is compatible with every Raspberry Pi 5 variant — 2 GB, 4 GB, 8 GB and 16 GB — so choose the memory size that matches your workload.

What does the dual 3.3 V 3.5 A power rating mean for my SSDs?

Each M.2 slot gets its own DC/DC converter delivering up to 3.5 A, so both drives can run at full speed simultaneously without power throttling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.