Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with two M.2 slots and gold edge connector

MCDODO

MCDODO X1004Support Dual M.2 NVMe HAT for Raspberry Pi 5

SKU CH-2Q5T-TKXYY MPN X1004Support

Adds two M.2 NVMe 2280 SSDs with independent 3.3 V 3.5 A power to Raspberry Pi 5 for boot and storage

  • TypeSingle Board Computers
  • Dual independent power supplies deliver up to 3.5 A per SSD
  • Supports two M.2 2280 NVMe drives plus 2230 or 2242 sizes
  • Boots Raspberry Pi 5 directly from NVMe with 2024-05-17 bootloader
  • Compatible with all Raspberry Pi 5 capacities from 2 GB to 16 GB
  • Fits P579 case versions V2, V3 and V4 or later

M.2 HAT for Raspberry Pi 5

The MCDODO X1004Support is a PCIe to dual M.2 HAT that adds two NVMe SSD slots to a Raspberry Pi 5. It fits the 2GB, 4GB, 8GB and 16GB board variants. Two dedicated DC/DC converters supply 3.3V at up to 3.5A to each drive for stable operation. The package includes the expansion board and an accessory pack.

Makers expanding Pi 5 storage

This HAT suits builders who want to run the operating system or heavy workloads from fast NVMe storage on a Pi 5. It accepts 2280-length drives and shorter 2230 or 2242 modules with an extender. Builders using a case other than the P579-V2, V3 or V4, or those needing a single-drive solution, should look at something else.

Dual NVMe slots with independent power

The deciding specification is the pair of M.2 Key-M slots fed by separate 3.3V step-down converters rated for 3.5A each. This architecture lets two SSDs run at full speed simultaneously without sharing a single power budget. Boot support requires the Pi 5 bootloader dated 2024-05-17 or later.

Kohokohdat

  • Dual independent power supplies deliver up to 3.5 A per SSD
  • Supports two M.2 2280 NVMe drives plus 2230 or 2242 sizes
  • Boots Raspberry Pi 5 directly from NVMe with 2024-05-17 bootloader
  • Compatible with all Raspberry Pi 5 capacities from 2 GB to 16 GB
  • Fits P579 case versions V2, V3 and V4 or later

Tekniset tiedot

TypeSingle Board Computers

Kysymyksiä tästä tuotteesta

What comes in the box and what must I supply separately?

The pack includes the X1004 expansion board and an accessory kit. You must provide a Raspberry Pi 5, one or two M.2 2280 NVMe SSDs, a power adapter and any active cooler or AI module you need.

Which Raspberry Pi 5 memory versions work with this HAT?

The board is compatible with every Raspberry Pi 5 variant — 2 GB, 4 GB, 8 GB and 16 GB — so choose the memory size that matches your workload.

What does the dual 3.3 V 3.5 A power rating mean for my SSDs?

Each M.2 slot gets its own DC/DC converter delivering up to 3.5 A, so both drives can run at full speed simultaneously without power throttling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.