Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Micron Technology, Inc.

Micron Technology, Inc. MTFDKBG1T9TDZ-1AZ1ZA 7400 PRO enterprise SSD 1.92TB M.2 22110 PCIe 4.0 NVMe

SKU CH-G48D-JDSPP MPN MTFDKBG1T9TDZ-1AZ1ZA

Enterprise M.2 22110 SSD with 1.92TB capacity and PCIe 4.0 NVMe performance for data centres

  • Form FactorM.2 22110
  • Capacity1.92TB
  • InterfacePCI Express 4.0 (NVMe)
  • FeaturesThe Micron 7400 SSD delivers extensive form factors, PCIe Ge
  • 92TB capacity supports large enterprise workloads
  • PCIe 4.0 NVMe interface enables high-speed data transfers
  • M.2 22110 form factor fits dense server configurations
  • 7400 PRO series built for demanding data centre environments
  • New condition ensures full manufacturer specification compliance

Micron 7400 PRO enterprise NVMe SSD 1.92TB

The Micron 7400 PRO is a new enterprise solid-state drive built for data-centre workloads that demand PCIe 4.0 NVMe speed and 1.92TB of capacity in the M.2 22110 form factor. It targets storage architects and server integrators who need consistent performance and leading-edge security features for dense, high-throughput arrays.

Suited for PCIe 4.0 servers with 22110 slots.

This drive fits systems that provide a full-length M.2 22110 connector and a PCIe 4.0 lane allocation. Builders working with shorter M.2 slots, older PCIe 3.0-only backplanes, or platforms that cannot supply the required power envelope for enterprise endurance should evaluate alternative form factors.

Deciding specification: M.2 22110 form factor

The 110 mm module length is the single attribute that determines physical compatibility; a chassis or motherboard must explicitly support the 22110 size to install this drive. Verify the slot length before purchase, as 2280 or 2230 slots will not accommodate it.

Priekšrocības

  • 92TB capacity supports large enterprise workloads
  • PCIe 4.0 NVMe interface enables high-speed data transfers
  • M.2 22110 form factor fits dense server configurations
  • 7400 PRO series built for demanding data centre environments
  • New condition ensures full manufacturer specification compliance

Specifikācijas

BrandMicron
Model7400 PRO
Part NumberMTFDKBG1T9TDZ-1AZ1ZABYY
Form FactorM.2 22110
Capacity1.92TB
InterfacePCI Express 4.0 (NVMe)
FeaturesThe Micron 7400 SSD delivers extensive form factors, PCIe Gen4 performance, and leading-edge security to meet the needs of demanding data centers.
Sūtījuma svars0.09 kg
Sūtījuma izmēri127 × 102 × 25 mm

Jautājumi par šo preci

How does the 1.92TB capacity translate to usable space in a server?

The 1.92TB rating is the raw NAND capacity; the formatted volume presented to the operating system will be slightly lower due to over-provisioning and file-system overhead.

What throughput ceiling does the PCI Express 4.0 interface impose on this drive?

The PCIe 4.0 x4 link caps sequential throughput at roughly 8 GB/s, so the 7400 PRO cannot exceed that ceiling even if the controller could go faster.

Will the M.2 22110 form factor fit in a standard 2280 slot?

No — the 110 mm length requires a motherboard or riser with a dedicated 22110 standoff; a 2280-only slot is physically too short.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.