Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Micron Technology, Inc.

Micron Technology, Inc. MTFDKBG1T9TDZ-1AZ1ZA 7400 PRO enterprise SSD 1.92TB M.2 22110 PCIe 4.0 NVMe

SKU CH-G48D-JDSPP MPN MTFDKBG1T9TDZ-1AZ1ZA

Enterprise M.2 22110 SSD with 1.92TB capacity and PCIe 4.0 NVMe performance for data centres

  • Form FactorM.2 22110
  • Capacity1.92TB
  • InterfacePCI Express 4.0 (NVMe)
  • FeaturesThe Micron 7400 SSD delivers extensive form factors, PCIe Ge
  • 92TB capacity supports large enterprise workloads
  • PCIe 4.0 NVMe interface enables high-speed data transfers
  • M.2 22110 form factor fits dense server configurations
  • 7400 PRO series built for demanding data centre environments
  • New condition ensures full manufacturer specification compliance

Micron 7400 PRO enterprise NVMe SSD 1.92TB

The Micron 7400 PRO is a new enterprise solid-state drive built for data-centre workloads that demand PCIe 4.0 NVMe speed and 1.92TB of capacity in the M.2 22110 form factor. It targets storage architects and server integrators who need consistent performance and leading-edge security features for dense, high-throughput arrays.

Suited for PCIe 4.0 servers with 22110 slots.

This drive fits systems that provide a full-length M.2 22110 connector and a PCIe 4.0 lane allocation. Builders working with shorter M.2 slots, older PCIe 3.0-only backplanes, or platforms that cannot supply the required power envelope for enterprise endurance should evaluate alternative form factors.

Deciding specification: M.2 22110 form factor

The 110 mm module length is the single attribute that determines physical compatibility; a chassis or motherboard must explicitly support the 22110 size to install this drive. Verify the slot length before purchase, as 2280 or 2230 slots will not accommodate it.

Najważniejsze cechy

  • 92TB capacity supports large enterprise workloads
  • PCIe 4.0 NVMe interface enables high-speed data transfers
  • M.2 22110 form factor fits dense server configurations
  • 7400 PRO series built for demanding data centre environments
  • New condition ensures full manufacturer specification compliance

Specyfikacja

BrandMicron
Model7400 PRO
Part NumberMTFDKBG1T9TDZ-1AZ1ZABYY
Form FactorM.2 22110
Capacity1.92TB
InterfacePCI Express 4.0 (NVMe)
FeaturesThe Micron 7400 SSD delivers extensive form factors, PCIe Gen4 performance, and leading-edge security to meet the needs of demanding data centers.
Waga przesyłki0.09 kg
Wymiary opakowania127 × 102 × 25 mm

Pytania dotyczące tego produktu

How does the 1.92TB capacity translate to usable space in a server?

The 1.92TB rating is the raw NAND capacity; the formatted volume presented to the operating system will be slightly lower due to over-provisioning and file-system overhead.

What throughput ceiling does the PCI Express 4.0 interface impose on this drive?

The PCIe 4.0 x4 link caps sequential throughput at roughly 8 GB/s, so the 7400 PRO cannot exceed that ceiling even if the controller could go faster.

Will the M.2 22110 form factor fit in a standard 2280 slot?

No — the 110 mm length requires a motherboard or riser with a dedicated 22110 standoff; a 2280-only slot is physically too short.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.