Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rectangular U.2 enterprise SSD with 15mm thick metal casing and edge connector visible

Micron Technology, Inc.

Micron Technology, Inc. MTFDLAL1T9THG-1BP1DFCYYR 1.92TB NVMe internal SSD

SKU CH-78B4-N80JS MPN MTFDLAL1T9THG-1BP1DFCYYR

A 1.92 TB enterprise NVMe SSD with PCIe 5.0 x 4 interface delivering 12000 Mbps sequential read and 3300 Mbps sequential write

  • Max Sequential Read12000Mbps
  • Max Sequential Write3300 Mbps
  • Capacity1.92TB
  • InterfaceNVMe; PCI Express 5.0 x 4
  • Enterprise workloads accelerate with 12000 Mbps sequential read
  • Large datasets fit on 1.92 TB capacity
  • PCIe 5.0 x 4 interface doubles lane bandwidth
  • Micron 7600 Pro series built for data-centre endurance
  • U.2 15 mm form factor suits dense server bays

Micron 7600 Pro 1.92TB U.2 Enterprise SSD

This Micron 7600 Pro drive provides 1.92TB of NVMe storage over a PCI Express 5.0 x 4 interface. It is built for enterprise servers and storage arrays that demand sustained throughput. The 15mm U.2 form factor fits compatible hot-swap bays in rackmount chassis. Sequential reads reach 12000Mbps and writes reach 3300 Mbps.

Suits PCIe 5.0 U.2 bays; not for other form factors

This SSD suits systems with a U.2 connector wired for PCIe 5.0 x 4 and space for a 15mm drive. Buyers needing a different physical connector such as M.2 or E1.S cannot install this unit. Workloads that require higher write bandwidth than 3300 Mbps should evaluate alternative models.

PCIe 5.0 x 4 interface decides compatibility

The single specification that determines fit is the PCI Express 5.0 x 4 NVMe interface. The host must provide a U.2 port wired for that link width and generation. Without it the drive will not operate at its rated 12000Mbps read speed.

Priekšrocības

  • Enterprise workloads accelerate with 12000 Mbps sequential read
  • Large datasets fit on 1.92 TB capacity
  • PCIe 5.0 x 4 interface doubles lane bandwidth
  • Micron 7600 Pro series built for data-centre endurance
  • U.2 15 mm form factor suits dense server bays

Specifikācijas

Max Sequential Read12000Mbps
Max Sequential Write3300 Mbps
Capacity1.92TB
InterfaceNVMe; PCI Express 5.0 x 4
BrandMicron
ModelMTFDLAL1T9THG-1BP1DFCYYR
Part NumberMTFDLAL1T9THG-1BP1DFCYYR
Sūtījuma svars0.45 kg
Sūtījuma izmēri25 × 25 × 25 mm

Jautājumi par šo preci

Does this drive fit a standard 2.5-inch U.2 hot-swap bay?

Yes. The Micron 7600 Pro is a 15 mm U.2 drive designed for enterprise 2.5-inch hot-swap bays.

What throughput can I expect from the PCIe 5.0 x4 link?

Up to 12000 Mbps sequential read and 3300 Mbps sequential write over the PCIe 5.0 x4 interface.

Is the 1.92 TB capacity usable for typical enterprise workloads?

The 1.92 TB capacity provides ample space for databases, virtualization, and high-performance caching in enterprise environments.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.