Micron Technology, Inc.
Micron Technology, Inc. MTFDLAL1T9THG-1BP1DFCYYR 1.92TB NVMe internal SSD
A 1.92 TB enterprise NVMe SSD with PCIe 5.0 x 4 interface delivering 12000 Mbps sequential read and 3300 Mbps sequential write
- Max Sequential Read12000Mbps
- Max Sequential Write3300 Mbps
- Capacity1.92TB
- InterfaceNVMe; PCI Express 5.0 x 4
- Enterprise workloads accelerate with 12000 Mbps sequential read
- Large datasets fit on 1.92 TB capacity
- PCIe 5.0 x 4 interface doubles lane bandwidth
- Micron 7600 Pro series built for data-centre endurance
- U.2 15 mm form factor suits dense server bays
Micron 7600 Pro 1.92TB U.2 Enterprise SSD
This Micron 7600 Pro drive provides 1.92TB of NVMe storage over a PCI Express 5.0 x 4 interface. It is built for enterprise servers and storage arrays that demand sustained throughput. The 15mm U.2 form factor fits compatible hot-swap bays in rackmount chassis. Sequential reads reach 12000Mbps and writes reach 3300 Mbps.
Suits PCIe 5.0 U.2 bays; not for other form factors
This SSD suits systems with a U.2 connector wired for PCIe 5.0 x 4 and space for a 15mm drive. Buyers needing a different physical connector such as M.2 or E1.S cannot install this unit. Workloads that require higher write bandwidth than 3300 Mbps should evaluate alternative models.
PCIe 5.0 x 4 interface decides compatibility
The single specification that determines fit is the PCI Express 5.0 x 4 NVMe interface. The host must provide a U.2 port wired for that link width and generation. Without it the drive will not operate at its rated 12000Mbps read speed.
Přednosti
- Enterprise workloads accelerate with 12000 Mbps sequential read
- Large datasets fit on 1.92 TB capacity
- PCIe 5.0 x 4 interface doubles lane bandwidth
- Micron 7600 Pro series built for data-centre endurance
- U.2 15 mm form factor suits dense server bays
Specifikace
| Max Sequential Read | 12000Mbps |
|---|---|
| Max Sequential Write | 3300 Mbps |
| Capacity | 1.92TB |
| Interface | NVMe; PCI Express 5.0 x 4 |
| Brand | Micron |
| Model | MTFDLAL1T9THG-1BP1DFCYYR |
| Part Number | MTFDLAL1T9THG-1BP1DFCYYR |
| Přepravní hmotnost | 0.45 kg |
| Rozměry balení | 25 × 25 × 25 mm |
Otázky k tomuto produktu
Does this drive fit a standard 2.5-inch U.2 hot-swap bay?
Yes. The Micron 7600 Pro is a 15 mm U.2 drive designed for enterprise 2.5-inch hot-swap bays.
What throughput can I expect from the PCIe 5.0 x4 link?
Up to 12000 Mbps sequential read and 3300 Mbps sequential write over the PCIe 5.0 x4 interface.
Is the 1.92 TB capacity usable for typical enterprise workloads?
The 1.92 TB capacity provides ample space for databases, virtualization, and high-performance caching in enterprise environments.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
