NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
MSI
GeForce RTX 2060 graphics card with 6 GB GDDR6 memory, 1920 CUDA cores and a 1830 MHz boost clock for 1440p gaming and ray tracing
The MSI GeForce RTX 2060 GAMING Z 6G targets gamers who want ray-traced visuals at 1440p without moving to a higher tier. It delivers 1920 CUDA cores and 6GB of GDDR6 memory on a 192-bit bus. The card fits a standard PCI Express 3.0 x16 slot and supports four simultaneous displays.
The 6GB GDDR6 memory running at 14 Gbps across a 192-bit interface is the spec that decides fit. It holds modern 1440p textures while the 1830 MHz boost clock pushes shader throughput. If your titles need more than 6GB at high settings, this model will bottleneck before the GPU core does.
The dual-fan Twin Frozr 7 cooler uses a semi-passive mode that stops the fans completely at idle or light loads. Under sustained gaming the fans spin up only enough to keep the GPU within its thermal envelope, so noise stays low and power draw remains consistent with the 1830 MHz boost behaviour.
| Brand | MSI |
|---|---|
| Model | RTX 2060 GAMING Z 6G |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 20 Series |
| GPU | GeForce RTX 2060 |
| Boost Clock | 1830 MHz |
| CUDA Cores | 1920 |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 6GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 190W |
| System Requirements | Recommended PSU: 500W |
| Power Connector | 8-Pin |
| HDCP Ready | 2.2 |
| Features | Twin Frozr 7 Thermal Design: TORX Fan 3.0 - Dispersion fan blade: Steep curved blade accelerating the airflow. - Traditional fan blade: Provides steady airflow to massive heat sink below. Mastery of Aerodynamics: The heatsink is optimized for efficient heat dissipation, keeping your temperatures low and performance high. Zero Frozr technology: Stopping the fan in low-load situations, keeping a noise-free environment. RGB Mystic Light: Customize colors and LED effects with exclusive MSI software and synchronize the look & feel with other components. Dragon Center: 1 click to optimize |
| Max GPU Length | 247 mm |
| Card Dimensions (L x H) | 9.72" x 5.08" |
The GPU will raise its frequency up to 1830 MHz when temperature and power headroom allow, then scale back under sustained load to stay within limits.
It caps the link at 3.0 signalling rates, so the card cannot use the higher bandwidth of newer 4.0 or 5.0 slots.
The TWIN FROZR 7 design occupies two expansion slots and needs enough clearance for the backplate and fan overhang.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?