NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
MSI
GeForce RTX 2060 graphics card with 6 GB GDDR6 memory, 1920 CUDA cores and a 1830 MHz boost clock for 1440p gaming and ray tracing
The MSI GeForce RTX 2060 GAMING Z 6G targets gamers who want ray-traced visuals at 1440p without moving to a higher tier. It delivers 1920 CUDA cores and 6GB of GDDR6 memory on a 192-bit bus. The card fits a standard PCI Express 3.0 x16 slot and supports four simultaneous displays.
The 6GB GDDR6 memory running at 14 Gbps across a 192-bit interface is the spec that decides fit. It holds modern 1440p textures while the 1830 MHz boost clock pushes shader throughput. If your titles need more than 6GB at high settings, this model will bottleneck before the GPU core does.
The dual-fan Twin Frozr 7 cooler uses a semi-passive mode that stops the fans completely at idle or light loads. Under sustained gaming the fans spin up only enough to keep the GPU within its thermal envelope, so noise stays low and power draw remains consistent with the 1830 MHz boost behaviour.
| Brand | MSI |
|---|---|
| Model | RTX 2060 GAMING Z 6G |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 20 Series |
| GPU | GeForce RTX 2060 |
| Boost Clock | 1830 MHz |
| CUDA Cores | 1920 |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 6GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 190W |
| System Requirements | Recommended PSU: 500W |
| Power Connector | 8-Pin |
| HDCP Ready | 2.2 |
| Features | Twin Frozr 7 Thermal Design: TORX Fan 3.0 - Dispersion fan blade: Steep curved blade accelerating the airflow. - Traditional fan blade: Provides steady airflow to massive heat sink below. Mastery of Aerodynamics: The heatsink is optimized for efficient heat dissipation, keeping your temperatures low and performance high. Zero Frozr technology: Stopping the fan in low-load situations, keeping a noise-free environment. RGB Mystic Light: Customize colors and LED effects with exclusive MSI software and synchronize the look & feel with other components. Dragon Center: 1 click to optimize |
| Max GPU Length | 247 mm |
| Card Dimensions (L x H) | 9.72" x 5.08" |
The GPU will raise its frequency up to 1830 MHz when temperature and power headroom allow, then scale back under sustained load to stay within limits.
It caps the link at 3.0 signalling rates, so the card cannot use the higher bandwidth of newer 4.0 or 5.0 slots.
The TWIN FROZR 7 design occupies two expansion slots and needs enough clearance for the backplate and fan overhang.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?