myVolts
myVolts 1000W ATX Power Supply Quiet 140mm Fan
Delivers 1000W via dual 12V rails with a 140mm ball-bearing fan rated at 32dB and sleeved cables including six SATA connectors
- TypeAT
- Quiet cooling with a 140 mm ball-bearing fan at 32 dB max
- 1000 W output on dual 12 V rails delivering 32 A each
- Broad connectivity: 24/20-pin, 4+4-pin CPU, 6-pin and 6+2-pin PCIe, six SATA, six Molex, two floppy
- Sleeve-wrapped cables simplify routing and airflow
- Certified FCC, TUV, RU, CE with 100,000-hour MTBF
1000W ATX Power Supply
The myVolts unit delivers 1000W through dual 12V rails rated at 32A each, with a 140mm ball-bearing fan that stays at or below 32dB under full load. Efficiency is rated at a minimum of 70% at full load, and the PSU carries FCC, TUV, RU and CE safety approvals.
Suited for SLI builds needing quiet operation
The single 6-pin and single 6+2-pin PCIe connectors limit this supply to graphics configurations requiring no more than two PCIe power cables. Builds with three or more power-hungry GPUs, or cards that demand dual 8-pin connectors, should look elsewhere.
Fits standard ATX cases with sleeved cables
The 24/20-pin main connector works on both 20-pin and 24-pin motherboards, while the 4+4-pin EPS cable supports modern CPU sockets. Six SATA and six Molex connectors cover drives and peripherals, and the wire sleeves simplify routing inside the chassis.
Priekšrocības
- Quiet cooling with a 140 mm ball-bearing fan at 32 dB max
- 1000 W output on dual 12 V rails delivering 32 A each
- Broad connectivity: 24/20-pin, 4+4-pin CPU, 6-pin and 6+2-pin PCIe, six SATA, six Molex, two floppy
- Sleeve-wrapped cables simplify routing and airflow
- Certified FCC, TUV, RU, CE with 100,000-hour MTBF
Specifikācijas
| Type | AT |
|---|
Jautājumi par šo preci
Does my motherboard need a 24-pin ATX socket for this PSU?
The unit includes a 24/20-pin main connector that fits both 20-pin and 24-pin motherboards, so either socket works.
Can I keep my older 6-pin PCIe graphics card with this power supply?
Yes, the PSU provides one dedicated 6-pin PCIe connector and one 6+2-pin connector that also accepts 6-pin cards.
How do I confirm the fan is running within its rated noise level after installation?
At full load the 140 mm ball-bearing fan should not exceed 32 dB; listen for a quiet, steady airflow without rattling.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.



