Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular matte-black ATX power supply with large 140mm fan grille and sleeved cables

myVolts

myVolts 1000W ATX Power Supply Quiet 140mm Fan

SKU CH-W7FZ-8GRH6

Delivers 1000W via dual 12V rails with a 140mm ball-bearing fan rated at 32dB and sleeved cables including six SATA connectors

  • TypeAT
  • Quiet cooling with a 140 mm ball-bearing fan at 32 dB max
  • 1000 W output on dual 12 V rails delivering 32 A each
  • Broad connectivity: 24/20-pin, 4+4-pin CPU, 6-pin and 6+2-pin PCIe, six SATA, six Molex, two floppy
  • Sleeve-wrapped cables simplify routing and airflow
  • Certified FCC, TUV, RU, CE with 100,000-hour MTBF

1000W ATX Power Supply

The myVolts unit delivers 1000W through dual 12V rails rated at 32A each, with a 140mm ball-bearing fan that stays at or below 32dB under full load. Efficiency is rated at a minimum of 70% at full load, and the PSU carries FCC, TUV, RU and CE safety approvals.

Suited for SLI builds needing quiet operation

The single 6-pin and single 6+2-pin PCIe connectors limit this supply to graphics configurations requiring no more than two PCIe power cables. Builds with three or more power-hungry GPUs, or cards that demand dual 8-pin connectors, should look elsewhere.

Fits standard ATX cases with sleeved cables

The 24/20-pin main connector works on both 20-pin and 24-pin motherboards, while the 4+4-pin EPS cable supports modern CPU sockets. Six SATA and six Molex connectors cover drives and peripherals, and the wire sleeves simplify routing inside the chassis.

Puncte forte

  • Quiet cooling with a 140 mm ball-bearing fan at 32 dB max
  • 1000 W output on dual 12 V rails delivering 32 A each
  • Broad connectivity: 24/20-pin, 4+4-pin CPU, 6-pin and 6+2-pin PCIe, six SATA, six Molex, two floppy
  • Sleeve-wrapped cables simplify routing and airflow
  • Certified FCC, TUV, RU, CE with 100,000-hour MTBF

Specificații

TypeAT

Întrebări despre acest articol

Does my motherboard need a 24-pin ATX socket for this PSU?

The unit includes a 24/20-pin main connector that fits both 20-pin and 24-pin motherboards, so either socket works.

Can I keep my older 6-pin PCIe graphics card with this power supply?

Yes, the PSU provides one dedicated 6-pin PCIe connector and one 6+2-pin connector that also accepts 6-pin cards.

How do I confirm the fan is running within its rated noise level after installation?

At full load the 140 mm ball-bearing fan should not exceed 32 dB; listen for a quiet, steady airflow without rattling.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.