Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver metal power supply unit with label showing APS-270 model details

myVolts

myVolts APS-270 power supply 100-240V 2.5-1.1A 50/60Hz 12V 16A 5.5V .9A 445g

SKU CH-TSMR-RM36M MPN APS-270

Replacement AT power supply for PS3 Slim models CECH2001, CECH2101 and CECH2501, delivering 12V 16A and 5.5V .9A from 100-240V input

  • TypeAT
  • Restores power to dead PS3 Slim consoles
  • Wide 100-240V input works worldwide
  • Delivers stable 12V 16A and 5.5V .9A rails
  • Installs in about 10 minutes with two screwdrivers
  • Light 445g unit fits CECH2001, CECH2101, CECH2501 models

Replacement PSU for PS3 Slim models 2000 2500

This power supply unit replaces the original APS-270 in Sony PlayStation 3 Slim consoles including the 120GB 160GB 250GB and 320GB versions. It is intended for owners whose console shows no power light and will not start. The unit is a tested pull from a working system and weighs 445g.

DC output rails 12V 16A and 5.5V 0.9A

The supply delivers two fixed voltages: a 12 volt rail rated at 16 amps and a 5.5 volt rail rated at 0.9 amps. These exact outputs determine whether the part matches the console's requirements. No other voltages or current ratings are provided by this model.

Fits CECH2001 CECH2101 CECH2501 chassis

Installation uses the existing mounting points and connectors inside the Slim chassis and typically takes around 10 minutes with two screwdrivers. The AC input accepts 100 to 240 volts at 50 or 60 hertz so the unit works on mains supplies worldwide. Buyers who need a supply for the original fat PS3 or for a different region-specific model should look elsewhere.

Priekšrocības

  • Restores power to dead PS3 Slim consoles
  • Wide 100-240V input works worldwide
  • Delivers stable 12V 16A and 5.5V .9A rails
  • Installs in about 10 minutes with two screwdrivers
  • Light 445g unit fits CECH2001, CECH2101, CECH2501 models

Specifikācijas

TypeAT

Jautājumi par šo preci

What does the 16A on the 12V rail mean once the APS-270 is installed in a PS3 Slim?

The 12V rail delivers up to 16A to the main board, GPU and drive motors, so the console can boot and run games without shutting down under load.

What AC input range and frequency does the APS-270 accept?

It accepts 100-240V at 50/60Hz, so it works on mains supplies worldwide without a voltage switch.

What physical space and mounting does the APS-270 need inside the console?

It fits the standard PS3 Slim chassis using the original screw holes and connector, weighing 445g and installing in roughly 10 minutes with two screwdrivers.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.