Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular silver metal power supply unit with label showing APS-270 model details

myVolts

myVolts APS-270 power supply 100-240V 2.5-1.1A 50/60Hz 12V 16A 5.5V .9A 445g

SKU CH-TSMR-RM36M MPN APS-270

Replacement AT power supply for PS3 Slim models CECH2001, CECH2101 and CECH2501, delivering 12V 16A and 5.5V .9A from 100-240V input

  • TypeAT
  • Restores power to dead PS3 Slim consoles
  • Wide 100-240V input works worldwide
  • Delivers stable 12V 16A and 5.5V .9A rails
  • Installs in about 10 minutes with two screwdrivers
  • Light 445g unit fits CECH2001, CECH2101, CECH2501 models

Replacement PSU for PS3 Slim models 2000 2500

This power supply unit replaces the original APS-270 in Sony PlayStation 3 Slim consoles including the 120GB 160GB 250GB and 320GB versions. It is intended for owners whose console shows no power light and will not start. The unit is a tested pull from a working system and weighs 445g.

DC output rails 12V 16A and 5.5V 0.9A

The supply delivers two fixed voltages: a 12 volt rail rated at 16 amps and a 5.5 volt rail rated at 0.9 amps. These exact outputs determine whether the part matches the console's requirements. No other voltages or current ratings are provided by this model.

Fits CECH2001 CECH2101 CECH2501 chassis

Installation uses the existing mounting points and connectors inside the Slim chassis and typically takes around 10 minutes with two screwdrivers. The AC input accepts 100 to 240 volts at 50 or 60 hertz so the unit works on mains supplies worldwide. Buyers who need a supply for the original fat PS3 or for a different region-specific model should look elsewhere.

Přednosti

  • Restores power to dead PS3 Slim consoles
  • Wide 100-240V input works worldwide
  • Delivers stable 12V 16A and 5.5V .9A rails
  • Installs in about 10 minutes with two screwdrivers
  • Light 445g unit fits CECH2001, CECH2101, CECH2501 models

Specifikace

TypeAT

Otázky k tomuto produktu

What does the 16A on the 12V rail mean once the APS-270 is installed in a PS3 Slim?

The 12V rail delivers up to 16A to the main board, GPU and drive motors, so the console can boot and run games without shutting down under load.

What AC input range and frequency does the APS-270 accept?

It accepts 100-240V at 50/60Hz, so it works on mains supplies worldwide without a voltage switch.

What physical space and mounting does the APS-270 need inside the console?

It fits the standard PS3 Slim chassis using the original screw holes and connector, weighing 445g and installing in roughly 10 minutes with two screwdrivers.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.