Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small 38 mm metal encoder with stainless spindle and 2 m cable

myVolts

myVolts E6B2-CWZ6C 38 mm incremental encoder 1000 P/R power supply

SKU CH-THAK-6MEW9 MPN E6B2-CWZ6C

A 38 mm incremental encoder delivering 1000 pulses per revolution with DC 5–26 V supply, ASIC anti-interference, and reverse-wiring protection

  • TypeAT
  • Stable rotation from a 38 mm stainless steel spindle
  • Reliable signals via internal ASIC with strong anti-interference
  • Protected operation with short-circuit and reverse-wiring safeguards
  • Quick setup thanks to compact, lightweight 38 mm housing
  • Flexible 1000 P/R resolution on 5–26 V DC supply

38 mm Incremental Encoder for Motion Control

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder built for industrial motion-control applications. It delivers up to 1000 pulses per revolution with selectable resolutions ranging from 100 to 5000 P/R. The alloy shell and aluminium body house internal ASIC devices for high reliability and strong anti-interference performance. A stainless steel spindle rated for 30 N radial and 20 N thrust loads ensures mechanical durability in demanding environments.

Installation and Common Pitfalls

The compact structure and 2 m standard wiring cable allow straightforward mounting in tight spaces. Connection uses colour-coded leads: brown for DC 5–26 V positive, blue for 0 V negative, and black for signal outputs. The unit includes load short-circuit protection and power-supply reverse-wiring protection to prevent damage during hookup. Miswiring the supply polarity or exceeding the 26 V limit are the most frequent causes of failure despite the built-in safeguards.

Pre-Order Compatibility Checklist

Verify that your controller accepts open-collector, voltage, complementary, push-pull, long-line-drive, differential or fork output types matching the encoder’s selectable output modes. Confirm the available supply voltage falls within the DC 5–26 V range and that the 6 mm thrust shaft diameter suits your coupling or mounting hardware. Ensure the required resolution is among the supported options from 100 to 5000 P/R. Buyers needing a hollow-shaft design or a different flange pattern should look elsewhere.

Priekšrocības

  • Stable rotation from a 38 mm stainless steel spindle
  • Reliable signals via internal ASIC with strong anti-interference
  • Protected operation with short-circuit and reverse-wiring safeguards
  • Quick setup thanks to compact, lightweight 38 mm housing
  • Flexible 1000 P/R resolution on 5–26 V DC supply

Specifikācijas

TypeAT

Jautājumi par šo preci

How do I verify the E6B2-CWZ6C encoder is working correctly after wiring?

Apply DC 5–26 V to the brown and blue leads, rotate the 6 mm shaft, and check for clean A, B and Z pulses at the chosen resolution such as 1000 P/R on an oscilloscope or controller input.

What comes in the box with the E6B2-CWZ6C and what must I source separately?

The encoder body with 2 m flying leads (brown for DC 5–26 V, blue for 0 V, black for signal) is included; mounting hardware, mating connectors and the DC power supply are not.

Which resolution should I select for the E6B2-CWZ6C — 1000, 1024 or 2000 P/R?

Choose 1000 P/R for simple decimal scaling, 1024 P/R for binary alignment with 10-bit systems, or 2000 P/R when finer positional granularity is needed; all are factory options on the same 38 mm housing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.