Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small 38 mm metal encoder with stainless spindle and 2 m cable

myVolts

myVolts E6B2-CWZ6C 38 mm incremental encoder 1000 P/R power supply

SKU CH-THAK-6MEW9 MPN E6B2-CWZ6C

A 38 mm incremental encoder delivering 1000 pulses per revolution with DC 5–26 V supply, ASIC anti-interference, and reverse-wiring protection

  • TypeAT
  • Stable rotation from a 38 mm stainless steel spindle
  • Reliable signals via internal ASIC with strong anti-interference
  • Protected operation with short-circuit and reverse-wiring safeguards
  • Quick setup thanks to compact, lightweight 38 mm housing
  • Flexible 1000 P/R resolution on 5–26 V DC supply

38 mm Incremental Encoder for Motion Control

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder built for industrial motion-control applications. It delivers up to 1000 pulses per revolution with selectable resolutions ranging from 100 to 5000 P/R. The alloy shell and aluminium body house internal ASIC devices for high reliability and strong anti-interference performance. A stainless steel spindle rated for 30 N radial and 20 N thrust loads ensures mechanical durability in demanding environments.

Installation and Common Pitfalls

The compact structure and 2 m standard wiring cable allow straightforward mounting in tight spaces. Connection uses colour-coded leads: brown for DC 5–26 V positive, blue for 0 V negative, and black for signal outputs. The unit includes load short-circuit protection and power-supply reverse-wiring protection to prevent damage during hookup. Miswiring the supply polarity or exceeding the 26 V limit are the most frequent causes of failure despite the built-in safeguards.

Pre-Order Compatibility Checklist

Verify that your controller accepts open-collector, voltage, complementary, push-pull, long-line-drive, differential or fork output types matching the encoder’s selectable output modes. Confirm the available supply voltage falls within the DC 5–26 V range and that the 6 mm thrust shaft diameter suits your coupling or mounting hardware. Ensure the required resolution is among the supported options from 100 to 5000 P/R. Buyers needing a hollow-shaft design or a different flange pattern should look elsewhere.

Kohokohdat

  • Stable rotation from a 38 mm stainless steel spindle
  • Reliable signals via internal ASIC with strong anti-interference
  • Protected operation with short-circuit and reverse-wiring safeguards
  • Quick setup thanks to compact, lightweight 38 mm housing
  • Flexible 1000 P/R resolution on 5–26 V DC supply

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

How do I verify the E6B2-CWZ6C encoder is working correctly after wiring?

Apply DC 5–26 V to the brown and blue leads, rotate the 6 mm shaft, and check for clean A, B and Z pulses at the chosen resolution such as 1000 P/R on an oscilloscope or controller input.

What comes in the box with the E6B2-CWZ6C and what must I source separately?

The encoder body with 2 m flying leads (brown for DC 5–26 V, blue for 0 V, black for signal) is included; mounting hardware, mating connectors and the DC power supply are not.

Which resolution should I select for the E6B2-CWZ6C — 1000, 1024 or 2000 P/R?

Choose 1000 P/R for simple decimal scaling, 1024 P/R for binary alignment with 10-bit systems, or 2000 P/R when finer positional granularity is needed; all are factory options on the same 38 mm housing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.