Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular stainless steel switching power supply, 21.5 by 11.5 by 5 cm, natural cooling, AC input selector switch visible

myVolts

myVolts Fesjoy 24V 15A 360W Switching Power Supply for Ender-3 LED Strip Computer Project Home Appliance

SKU CH-4Q5V-98HBB

Converts AC 110V or 240V to DC 24V at 15A and 360W with overload, over-voltage and short-circuit protection for 3D printers, LED strips and home appliances

  • TypeAT
  • Converts AC 110V or 220V to stable DC 24V 15A 360W output
  • Selectable input voltage switch matches local mains before powering on
  • Over-voltage, overload, over-temperature and short-circuit protections guard connected equipment
  • Operates from -20°C to 60°C with fan-less natural cooling
  • Compact 21.5 × 11.5 × 5 cm stainless-steel case fits tight project enclosures

24V 15A Switching Supply for 3D Printers

This myVolts Fesjoy unit converts AC 110V or 220V mains to a regulated DC 24V output rated at 15 amps and 360 watts. It is built around a pulse-width-modulation full-bridge topology and uses natural convection cooling inside a stainless-steel enclosure. The supply targets Ender-3 printers, LED strip installations and similar fixed-voltage projects.

Verify Mains Selector and Load Before Wiring

A sliding switch on the chassis selects between 110V and 220V AC input; it must match the local supply before power is applied. The adjustable output trims within ±10% of 24V, so confirm the connected device tolerates that range. Protection triggers at 105% to 150% of rated power for both over-voltage and overload, and the operating envelope spans -20°C to 60°C without frost.

Suits Fixed 24V Loads Up to 360W

Makers running an Ender-3, LED arrays or comparable 24V equipment within the 15A limit will find the steady output and passive cooling a good fit. Builds that need variable voltage, higher current, forced-air cooling or a different form factor should look elsewhere.

Priekšrocības

  • Converts AC 110V or 220V to stable DC 24V 15A 360W output
  • Selectable input voltage switch matches local mains before powering on
  • Over-voltage, overload, over-temperature and short-circuit protections guard connected equipment
  • Operates from -20°C to 60°C with fan-less natural cooling
  • Compact 21.5 × 11.5 × 5 cm stainless-steel case fits tight project enclosures

Specifikācijas

TypeAT

Jautājumi par šo preci

What comes in the package and do I need to buy a power cord separately?

The box contains the power supply unit only. A mains cable is not included and must be sourced separately.

Which input voltage setting should I select for UK mains?

Set the switch to the 240 V position before connecting to UK mains.

What does the 360 W rating mean for a 24 V Ender-3 build?

It delivers up to 15 A at 24 V, enough for the hot-end, heated bed and typical accessories on an Ender-3.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.