Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact enclosed metal power supply unit with terminal block outputs and input voltage selector switch

myVolts

myVolts S-50-24 24 V 2.1 A 50.4 W power supply

SKU CH-4ZC4-J6MGZ MPN S-50-24

Delivers 24 V at 2.1 A with 50.4 W output, 86 % efficiency, and selectable 85-132 VAC or 170-264 VAC input for industrial use

  • TypeAT
  • Delivers stable 24 V output with ±1 % regulation
  • Supplies up to 2.1 A continuous current for 50.4 W loads
  • Operates at 86 % efficiency to reduce heat
  • Accepts 85-132 VAC or 170-264 VAC via selector switch
  • Copper coil transformer ensures reliable, safe operation

Industrial 24 V DC power supply

The myVolts S-50-24 is a switching power supply that delivers a regulated 24 V output at up to 2.1 A for 50.4 W of continuous power. It is built for industrial control systems, PLC equipment and transportation facilities where a compact, copper-coil unit with simple wiring is required.

AC input range and voltage adjustment

The unit accepts 85-132 VAC or 170-264 VAC selected by a manual switch, plus 240-370 VDC, all at 47-63 Hz. Output voltage can be trimmed by ±10 % to compensate for cable drops, while ripple and noise stay at 200 mVp-p and regulation holds within ±0.5 % for line and load changes.

50.4 W rated output power

The 50.4 W rating sets the hard limit for the connected load; exceeding 2.1 A will trigger protection or cause voltage sag. Buyers needing more current or higher total wattage must select a larger supply, as this model cannot be paralleled or uprated.

Priekšrocības

  • Delivers stable 24 V output with ±1 % regulation
  • Supplies up to 2.1 A continuous current for 50.4 W loads
  • Operates at 86 % efficiency to reduce heat
  • Accepts 85-132 VAC or 170-264 VAC via selector switch
  • Copper coil transformer ensures reliable, safe operation

Specifikācijas

TypeAT

Jautājumi par šo preci

Should I pick the fixed 24 V model or the adjustable ±10 % version?

The S-50-24 delivers a fixed 24 V output; the ±10 % range is a factory trim for calibration, not a user-selectable voltage.

What does the 50.4 W rating mean for my 24 V load?

At 24 V the unit supplies up to 2.1 A continuously, so any device drawing 50.4 W or less at 24 V will run within spec.

How does the AC input selector affect the 230 V mains I have?

Set the switch to the 170-264 VAC position; the supply will draw 0.65 A at 230 V and tolerate 47-63 Hz mains frequency.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.