BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027736BTC
Krājumā
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 3200MHz CL22 1.2V 2Rx8 UDIMM memory upgrade for ASRock B660M
Four 32 GB DDR4 UDIMM modules totalling 128 GB at 3200 MHz CL22 1.2 V for ASRock B660M motherboards
- Capacity128GB (4 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity across four 32 GB modules
- DDR4 3200 speed rated at PC4-25600
- CL22 latency at 1.20 V operating voltage
- 288-pin 2Rx8 unbuffered UDIMM form factor
- Validated for ASRock B660M motherboard series
128 GB kit for ASRock B660M
This 128 GB kit contains four 32 GB DDR4 UDIMM modules rated at 3200 MHz with CL22 latency. It is built for the ASRock B660M PG Riptide, Phantom Gaming 4 and Pro RS motherboards and runs at 1.20 V without ECC or heat spreaders.
Upgrade from lower capacity or slower DDR4
Replacing a smaller kit or slower DDR4 modules with this 128 GB set adds the headroom needed for heavy multitasking, content creation or virtualisation workloads. The jump is worth it when your current memory limits the number of concurrent applications or virtual machines you can run.
Fits four UDIMM slots on compatible ASRock boards
The kit occupies all four 288-pin slots on the supported B660M models and requires no extra cooling hardware. It frees the builder from mixing different module capacities or speeds and leaves the remaining system resources available for other upgrades.
Priekšrocības
- 128 GB total capacity across four 32 GB modules
- DDR4 3200 speed rated at PC4-25600
- CL22 latency at 1.20 V operating voltage
- 288-pin 2Rx8 unbuffered UDIMM form factor
- Validated for ASRock B660M motherboard series
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
Does the 288-pin DDR4 UDIMM form factor fit the ASRock B660M motherboard DIMM slots?
Yes, the kit uses the standard 288-pin DDR4 UDIMM design that matches the four DIMM slots on the ASRock B660M boards listed.
What is the correct way to seat all four 32 GB modules so the board recognises the full 128 GB?
Insert each stick vertically until the retention clips click on both sides; the most common mistake is stopping when only one clip engages, leaving the module partly unseated.
Will the modules need any firmware updates or heat-spreader maintenance over time?
No firmware updates are required for memory, and the kit has no heat spreader to clean or replace; the modules are designed to run at 1.2 V for their service life.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
