We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green 288-pin DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR4 3200MHz CL22 1.2V 2Rx8 UDIMM memory upgrade for ASRock B660M

SKU CH-1G8R-GEQZY

Four 32 GB DDR4 UDIMM modules totalling 128 GB at 3200 MHz CL22 1.2 V for ASRock B660M motherboards

  • Capacity128GB (4 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB total capacity across four 32 GB modules
  • DDR4 3200 speed rated at PC4-25600
  • CL22 latency at 1.20 V operating voltage
  • 288-pin 2Rx8 unbuffered UDIMM form factor
  • Validated for ASRock B660M motherboard series

128 GB kit for ASRock B660M

This 128 GB kit contains four 32 GB DDR4 UDIMM modules rated at 3200 MHz with CL22 latency. It is built for the ASRock B660M PG Riptide, Phantom Gaming 4 and Pro RS motherboards and runs at 1.20 V without ECC or heat spreaders.

Upgrade from lower capacity or slower DDR4

Replacing a smaller kit or slower DDR4 modules with this 128 GB set adds the headroom needed for heavy multitasking, content creation or virtualisation workloads. The jump is worth it when your current memory limits the number of concurrent applications or virtual machines you can run.

Fits four UDIMM slots on compatible ASRock boards

The kit occupies all four 288-pin slots on the supported B660M models and requires no extra cooling hardware. It frees the builder from mixing different module capacities or speeds and leaves the remaining system resources available for other upgrades.

Highlights

  • 128 GB total capacity across four 32 GB modules
  • DDR4 3200 speed rated at PC4-25600
  • CL22 latency at 1.20 V operating voltage
  • 288-pin 2Rx8 unbuffered UDIMM form factor
  • Validated for ASRock B660M motherboard series

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-328K4
Capacity128GB (4 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB (4X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does the 288-pin DDR4 UDIMM form factor fit the ASRock B660M motherboard DIMM slots?

Yes, the kit uses the standard 288-pin DDR4 UDIMM design that matches the four DIMM slots on the ASRock B660M boards listed.

What is the correct way to seat all four 32 GB modules so the board recognises the full 128 GB?

Insert each stick vertically until the retention clips click on both sides; the most common mistake is stopping when only one clip engages, leaving the module partly unseated.

Will the modules need any firmware updates or heat-spreader maintenance over time?

No firmware updates are required for memory, and the kit has no heat spreader to clean or replace; the modules are designed to run at 1.2 V for their service life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.