BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027811BTC
Krājumā
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600MHz CL46 1.1V 288-Pin UDIMM Supermicro BH4SRG
A 128GB DDR5 kit of four 32GB UDIMMs running at 5600MHz with CL46 latency and 1.1V operation, validated for Supermicro BH4SRG motherboards
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity for heavy multitasking
- Four 32 GB modules fill four slots
- DDR5 5600 speed with CL46 latency
- Low 1.1 V voltage reduces power draw
- Validated for Supermicro BH4SRG motherboard
Capacity and Compatibility
This 128 GB kit contains four 32 GB DDR5 modules validated for the Supermicro BH4SRG motherboard. It targets administrators and builders who need the maximum supported density on that specific platform.
Voltage and Thermal Profile
Operating at 1.10 V with CL46 latency, the unbuffered non-ECC modules run without heat spreaders and draw minimal power during typical desktop or workstation workloads. The standard DDR5 voltage keeps thermal output low inside a closed chassis.
Sustained Load Behaviour
Under continuous memory-intensive tasks the dual-rank 2Rx8 organisation maintains the rated 5600 MT/s data rate without throttling. The kit delivers stable throughput for virtualisation, rendering or database workloads that saturate all four slots.
Priekšrocības
- 128 GB total capacity for heavy multitasking
- Four 32 GB modules fill four slots
- DDR5 5600 speed with CL46 latency
- Low 1.1 V voltage reduces power draw
- Validated for Supermicro BH4SRG motherboard
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Jautājumi par šo preci
How do I install the 4 x 32GB DDR5 5600MHz modules on the Supermicro BH4SRG and what step is often missed?
Power off the system, open the case, align each 288-pin UDIMM with the slot notch, press firmly until the retention clips click, then enable XMP or manually set 5600 MT/s and CL46 in the BIOS — the step many miss is confirming the 1.1V voltage in firmware.
What maintenance or replacement will the 128GB DDR5 2Rx8 kit need over time?
No routine maintenance is required; the modules have no heat spreader and run at 1.10V, so keep the chassis airflow clean. If a module fails, replace the faulty 32GB stick — the kit carries a lifetime replacement warranty from NEMIX RAM.
What limit appears first when the 4 x 32GB DDR5 5600 CL46 kit runs sustained workloads?
The primary limit is the CL46 latency at 5600 MT/s; sustained heavy traffic will hit timing bottlenecks before thermal throttling, since the unbuffered 2Rx8 modules operate at the standard 1.1V without additional cooling.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
