BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
NEMIX RAM
A 128GB DDR5 kit of four 32GB UDIMMs running at 5600MHz with CL46 latency and 1.1V operation, validated for Supermicro BH4SRG motherboards
This 128 GB kit contains four 32 GB DDR5 modules validated for the Supermicro BH4SRG motherboard. It targets administrators and builders who need the maximum supported density on that specific platform.
Operating at 1.10 V with CL46 latency, the unbuffered non-ECC modules run without heat spreaders and draw minimal power during typical desktop or workstation workloads. The standard DDR5 voltage keeps thermal output low inside a closed chassis.
Under continuous memory-intensive tasks the dual-rank 2Rx8 organisation maintains the rated 5600 MT/s data rate without throttling. The kit delivers stable throughput for virtualisation, rendering or database workloads that saturate all four slots.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Power off the system, open the case, align each 288-pin UDIMM with the slot notch, press firmly until the retention clips click, then enable XMP or manually set 5600 MT/s and CL46 in the BIOS — the step many miss is confirming the 1.1V voltage in firmware.
No routine maintenance is required; the modules have no heat spreader and run at 1.10V, so keep the chassis airflow clean. If a module fails, replace the faulty 32GB stick — the kit carries a lifetime replacement warranty from NEMIX RAM.
The primary limit is the CL46 latency at 5600 MT/s; sustained heavy traffic will hit timing bottlenecks before thermal throttling, since the unbuffered 2Rx8 modules operate at the standard 1.1V without additional cooling.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม