NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
A 144 GB DDR5 server memory kit of six 24 GB registered ECC RDIMMs running at 5600 MT/s with CAS 46 and 1.1 V
This kit delivers 144 GB of DDR5 memory across six 24 GB registered DIMMs. It is built for servers that require ECC error correction and registered signalling at the DDR5 5600 standard. Desktop or workstation boards that lack registered-DIMM support cannot use these modules.
Each module operates at 1.1 V, keeping power draw low for high-density server configurations. The registered buffer and ECC logic add negligible heat under normal workloads, and the modules run silently without active cooling. Typical server airflow is sufficient to maintain stable temperatures.
The registered ECC RDIMM form factor is the single factor that determines compatibility. Only platforms that explicitly support DDR5 registered DIMMs with 2Rx8 organisation and 288-pin layout will accept this kit.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-2428K6-SM-AS-1115HS-TNR |
| Part Number | Part#: MR44800-2428K6-SM-AS-1115HS-TNR |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all six 24 GB sticks run at 5600 MHz with ECC active — the step most people skip is enabling ECC in the firmware after physical installation.
The modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a stick fails ECC correction or the server platform is upgraded beyond DDR5 5600 support.
The CAS latency of 46 cycles at 5600 MHz sets the timing ceiling, so sustained throughput is bounded by that latency figure before voltage or thermal throttling becomes a factor.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?