NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
A 144 GB DDR5 server memory kit of six 24 GB registered ECC RDIMMs running at 5600 MT/s with CAS 46 and 1.1 V
This kit delivers 144 GB of DDR5 memory across six 24 GB registered DIMMs. It is built for servers that require ECC error correction and registered signalling at the DDR5 5600 standard. Desktop or workstation boards that lack registered-DIMM support cannot use these modules.
Each module operates at 1.1 V, keeping power draw low for high-density server configurations. The registered buffer and ECC logic add negligible heat under normal workloads, and the modules run silently without active cooling. Typical server airflow is sufficient to maintain stable temperatures.
The registered ECC RDIMM form factor is the single factor that determines compatibility. Only platforms that explicitly support DDR5 registered DIMMs with 2Rx8 organisation and 288-pin layout will accept this kit.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-2428K6-SM-AS-1115HS-TNR |
| Part Number | Part#: MR44800-2428K6-SM-AS-1115HS-TNR |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all six 24 GB sticks run at 5600 MHz with ECC active — the step most people skip is enabling ECC in the firmware after physical installation.
The modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a stick fails ECC correction or the server platform is upgraded beyond DDR5 5600 support.
The CAS latency of 46 cycles at 5600 MHz sets the timing ceiling, so sustained throughput is bounded by that latency figure before voltage or thermal throttling becomes a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?