BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278391BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB 2x8GB DDR4 3200 CL22 260-Pin SODIMM Kit POSIFLEX ZT-3115
DDR4 3200 SODIMM kit adds 16 GB across two 8 GB modules for POSIFLEX ZT-3115 terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 MHz PC4-25600 speed matches system spec
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
- Non-ECC unbuffered 2Rx8 modules built with major OEM chips
POSIFLEX ZT-3115 memory kit
This 16 GB kit is built for the POSIFLEX ZT-3115 Haydn ZT series point-of-sale terminal. It contains two 8 GB DDR4 3200 SODIMM modules that match the system's required 260-pin form factor and 1.20 V operating voltage.
DDR4 3200 SODIMM limits
DDR4 3200 (PC4-25600) sets the maximum data rate this platform can use; faster modules will simply run at this speed. The CL22 latency and 2Rx8 dual-rank organisation are fixed by the specification, so tighter timings or single-rank alternatives cannot be selected.
Upgrade from lower capacity or speed
Replacing a smaller kit or slower DDR4 SODIMMs adds headroom for multi-tasking POS applications and reduces swap activity. The jump is worthwhile when the terminal currently runs with less than 16 GB or operates below 3200 MT/s.
Priekšrocības
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 MHz PC4-25600 speed matches system spec
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
- Non-ECC unbuffered 2Rx8 modules built with major OEM chips
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Jautājumi par šo preci
Should I pick the 16GB 2x8GB kit or a single 16GB module for the POSIFLEX ZT-3115?
The kit supplies two matched 8GB SODIMMs for dual-channel operation, which the ZT-3115 platform can utilise for higher memory bandwidth than a single 16GB stick.
What does the 3200 MT/s rating deliver inside the POSIFLEX ZT-3115?
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the terminal the rated throughput the platform negotiates at boot.
Does the 260-pin DDR4 SODIMM interface limit speed or capacity in this terminal?
The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal and 8 GB per rank; the ZT-3115 chipset caps the bus at that speed and supports the 16 GB kit density.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
