Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 3200 CL22 260-Pin SODIMM Kit POSIFLEX ZT-3115

SKU CH-X3DG-FVD6A

DDR4 3200 SODIMM kit adds 16 GB across two 8 GB modules for POSIFLEX ZT-3115 terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MHz PC4-25600 speed matches system spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
  • Non-ECC unbuffered 2Rx8 modules built with major OEM chips

POSIFLEX ZT-3115 memory kit

This 16 GB kit is built for the POSIFLEX ZT-3115 Haydn ZT series point-of-sale terminal. It contains two 8 GB DDR4 3200 SODIMM modules that match the system's required 260-pin form factor and 1.20 V operating voltage.

DDR4 3200 SODIMM limits

DDR4 3200 (PC4-25600) sets the maximum data rate this platform can use; faster modules will simply run at this speed. The CL22 latency and 2Rx8 dual-rank organisation are fixed by the specification, so tighter timings or single-rank alternatives cannot be selected.

Upgrade from lower capacity or speed

Replacing a smaller kit or slower DDR4 SODIMMs adds headroom for multi-tasking POS applications and reduces swap activity. The jump is worthwhile when the terminal currently runs with less than 16 GB or operates below 3200 MT/s.

Points forts

  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 MHz PC4-25600 speed matches system spec
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots
  • Non-ECC unbuffered 2Rx8 modules built with major OEM chips

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions sur cet article

Should I pick the 16GB 2x8GB kit or a single 16GB module for the POSIFLEX ZT-3115?

The kit supplies two matched 8GB SODIMMs for dual-channel operation, which the ZT-3115 platform can utilise for higher memory bandwidth than a single 16GB stick.

What does the 3200 MT/s rating deliver inside the POSIFLEX ZT-3115?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the terminal the rated throughput the platform negotiates at boot.

Does the 260-pin DDR4 SODIMM interface limit speed or capacity in this terminal?

The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal and 8 GB per rank; the ZT-3115 chipset caps the bus at that speed and supports the 16 GB kit density.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.