BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278211BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 1.2V 260-pin SODIMM for POSIFLEX TX-2300 memory upgrade
16 GB DDR4-2666 SODIMM module designed for the POSIFLEX TX-2300 system
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Boosts POS system responsiveness with 16GB DDR4 2666MHz speed
- Ensures stable operation using major OEM Samsung Micron Hynix chips
- Low 1.2V voltage reduces power draw and heat output
- Guaranteed compatibility designed for Posiflex TX-2300 mini PC
- Simple SODIMM installation upgrades memory in minutes
POSIFLEX TX-2300 Memory Upgrade
This 16GB DDR4 SODIMM module is built specifically for the POSIFLEX TX-2300 Mini-PC and multi-purpose controller. It delivers 2666MHz speed with CL19 latency at a standard 1.2V operating voltage. The single-rank 2Rx8 configuration uses unbuffered, non-ECC chips from major OEM suppliers.
For Single-Slot Capacity Needs
This module suits technicians upgrading a POSIFLEX TX-2300 where only one SODIMM slot is available or a single 16GB stick is preferred. It is not for systems requiring ECC error correction, registered buffering, or DDR5 memory technology. Buyers needing lower voltage operation or a different pin count should verify their platform specifications first.
DDR4 2666MHz CL19 Specification
The decisive specification is the DDR4 2666MHz speed with CL19 CAS latency at 1.2V. This exact combination determines whether the memory will POST and run stably in the target POSIFLEX TX-2300 controller. Matching these three values to the system requirements is the only way to confirm correct compatibility.
Priekšrocības
- Boosts POS system responsiveness with 16GB DDR4 2666MHz speed
- Ensures stable operation using major OEM Samsung Micron Hynix chips
- Low 1.2V voltage reduces power draw and heat output
- Guaranteed compatibility designed for Posiflex TX-2300 mini PC
- Simple SODIMM installation upgrades memory in minutes
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
Should I pick the 16GB single stick or look for a dual-channel kit for the TX-2300?
The module is sold as a single 16GB SODIMM; if your TX-2300 has two slots, adding a second identical stick later will enable dual-channel bandwidth.
What does the 2666 MT/s rating actually deliver inside the POSIFLEX TX-2300?
The system will run the memory at up to 2666 MT/s provided the processor and chipset support that speed; otherwise it downclocks to the highest common rate.
How does the DDR4 SODIMM interface limit performance in this mini-PC?
The 260-pin DDR4 SODIMM slot caps transfer rate at the module's 2666 MT/s specification and 1.2 V operation; faster DDR4 or DDR5 modules cannot be used.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
