Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board SODIMM module with black memory chips, 260-pin DDR4 form factor

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 1.2V 260-pin SODIMM for POSIFLEX TX-2300 memory upgrade

SKU CH-B87T-SWMM9

16 GB DDR4-2666 SODIMM module designed for the POSIFLEX TX-2300 system

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Boosts POS system responsiveness with 16GB DDR4 2666MHz speed
  • Ensures stable operation using major OEM Samsung Micron Hynix chips
  • Low 1.2V voltage reduces power draw and heat output
  • Guaranteed compatibility designed for Posiflex TX-2300 mini PC
  • Simple SODIMM installation upgrades memory in minutes

POSIFLEX TX-2300 Memory Upgrade

This 16GB DDR4 SODIMM module is built specifically for the POSIFLEX TX-2300 Mini-PC and multi-purpose controller. It delivers 2666MHz speed with CL19 latency at a standard 1.2V operating voltage. The single-rank 2Rx8 configuration uses unbuffered, non-ECC chips from major OEM suppliers.

For Single-Slot Capacity Needs

This module suits technicians upgrading a POSIFLEX TX-2300 where only one SODIMM slot is available or a single 16GB stick is preferred. It is not for systems requiring ECC error correction, registered buffering, or DDR5 memory technology. Buyers needing lower voltage operation or a different pin count should verify their platform specifications first.

DDR4 2666MHz CL19 Specification

The decisive specification is the DDR4 2666MHz speed with CL19 CAS latency at 1.2V. This exact combination determines whether the memory will POST and run stably in the target POSIFLEX TX-2300 controller. Matching these three values to the system requirements is the only way to confirm correct compatibility.

Helstu kostir

  • Boosts POS system responsiveness with 16GB DDR4 2666MHz speed
  • Ensures stable operation using major OEM Samsung Micron Hynix chips
  • Low 1.2V voltage reduces power draw and heat output
  • Guaranteed compatibility designed for Posiflex TX-2300 mini PC
  • Simple SODIMM installation upgrades memory in minutes

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

Should I pick the 16GB single stick or look for a dual-channel kit for the TX-2300?

The module is sold as a single 16GB SODIMM; if your TX-2300 has two slots, adding a second identical stick later will enable dual-channel bandwidth.

What does the 2666 MT/s rating actually deliver inside the POSIFLEX TX-2300?

The system will run the memory at up to 2666 MT/s provided the processor and chipset support that speed; otherwise it downclocks to the highest common rate.

How does the DDR4 SODIMM interface limit performance in this mini-PC?

The 260-pin DDR4 SODIMM slot caps transfer rate at the module's 2666 MT/s specification and 1.2 V operation; faster DDR4 or DDR5 modules cannot be used.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.