SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00495769BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 ECC RDIMM THINKMATE STX-TN-XE16-23S3 memory upgrade
16 GB DDR4 3200 CL22 ECC registered DIMM for Thinkmate STX-TN-XE16-23S3 servers
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 ECC RDIMM protects data integrity
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 registered design stabilises heavy server workloads
- Built with Samsung Micron Hynix chips for reliability
- Validated for ThinkMate STX-TN-XE16-23S3 NAS systems
Server-grade memory upgrade
This 16 GB DDR4 3200 module adds ECC registered capacity to compatible Thinkmate STX-TN-XE16-23S3 NAS servers. It operates at 1.2 V with CL22 latency and a 2Rx8 rank layout on a 288-pin RDIMM form factor. The module uses major OEM chips from Samsung Micron or Hynix and runs at the PC4-25600 data rate.
Replaces non-ECC or lower-capacity DIMMs
The jump is worthwhile when data integrity and registered signalling are required for the target platform. Systems running without ECC or with smaller registered modules gain error correction and higher density in a single slot. Builds that do not support registered ECC RDIMMs cannot use this module.
Fits Thinkmate STX-TN-XE16-23S3 NAS servers
The 288-pin RDIMM installs directly into the server's DDR4 memory slots with no heat spreader to clear. It frees a DIMM slot compared to populating two 8 GB modules for the same capacity. Buyers needing unbuffered memory or a different pin count should look elsewhere.
Priekšrocības
- 16 GB DDR4 3200 ECC RDIMM protects data integrity
- CL22 latency at 1.20 V keeps power draw low
- 2Rx8 registered design stabilises heavy server workloads
- Built with Samsung Micron Hynix chips for reliability
- Validated for ThinkMate STX-TN-XE16-23S3 NAS systems
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Jautājumi par šo preci
Does this 288-pin DDR4 RDIMM need a registered-memory-capable slot on the THINKMATE STX-TN-XE16-23S3?
Yes, it is a registered ECC module and must be installed in a motherboard slot that supports registered DDR4 memory.
What is the correct orientation step when inserting the 1.20V module into the server?
Align the notch on the 288-pin edge connector with the key in the slot, press down evenly until both retention clips click, and verify the module sits fully seated.
When should the 16GB 2Rx8 CL22 DIMM be replaced?
Replace it if the system logs uncorrectable ECC errors or the module fails a memory diagnostic test.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
