Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green DDR4 RDIMM module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 ECC RDIMM THINKMATE STX-TN-XE16-23S3 memory upgrade

SKU CH-MH5Y-HPE4T

16 GB DDR4 3200 CL22 ECC registered DIMM for Thinkmate STX-TN-XE16-23S3 servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 ECC RDIMM protects data integrity
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 registered design stabilises heavy server workloads
  • Built with Samsung Micron Hynix chips for reliability
  • Validated for ThinkMate STX-TN-XE16-23S3 NAS systems

Server-grade memory upgrade

This 16 GB DDR4 3200 module adds ECC registered capacity to compatible Thinkmate STX-TN-XE16-23S3 NAS servers. It operates at 1.2 V with CL22 latency and a 2Rx8 rank layout on a 288-pin RDIMM form factor. The module uses major OEM chips from Samsung Micron or Hynix and runs at the PC4-25600 data rate.

Replaces non-ECC or lower-capacity DIMMs

The jump is worthwhile when data integrity and registered signalling are required for the target platform. Systems running without ECC or with smaller registered modules gain error correction and higher density in a single slot. Builds that do not support registered ECC RDIMMs cannot use this module.

Fits Thinkmate STX-TN-XE16-23S3 NAS servers

The 288-pin RDIMM installs directly into the server's DDR4 memory slots with no heat spreader to clear. It frees a DIMM slot compared to populating two 8 GB modules for the same capacity. Buyers needing unbuffered memory or a different pin count should look elsewhere.

Fordele

  • 16 GB DDR4 3200 ECC RDIMM protects data integrity
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 registered design stabilises heavy server workloads
  • Built with Samsung Micron Hynix chips for reliability
  • Validated for ThinkMate STX-TN-XE16-23S3 NAS systems

Specifikationer

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Spørgsmål om denne vare

Does this 288-pin DDR4 RDIMM need a registered-memory-capable slot on the THINKMATE STX-TN-XE16-23S3?

Yes, it is a registered ECC module and must be installed in a motherboard slot that supports registered DDR4 memory.

What is the correct orientation step when inserting the 1.20V module into the server?

Align the notch on the 288-pin edge connector with the key in the slot, press down evenly until both retention clips click, and verify the module sits fully seated.

When should the 16GB 2Rx8 CL22 DIMM be replaced?

Replace it if the system logs uncorrectable ECC errors or the module fails a memory diagnostic test.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.