Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC UDIMM 1Rx8 1.1V

SKU CH-4Y15-YBTA5

16GB DDR5 4800 ECC unbuffered UDIMM with 1Rx8 organisation, CAS 40 latency and 1.1V operation

  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • Rank1Rx8
  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

NEMIX RAM 16GB DDR5 4800 ECC UDIMM

This 16 GB unbuffered DIMM runs at DDR5 4800 with CAS 40 latency and 1.1 V operation. It provides error-correcting code protection for data integrity in compatible platforms. The module uses a single-rank 1Rx8 organisation based on major OEM DRAM chips.

Suits servers and workstations needing DDR5 4800

Systems that require registered or load-reduced DIMMs cannot use this unbuffered module. Builders targeting higher speeds or lower latencies than 4800 MT/s and CL40 should look at alternative specifications. Non-ECC platforms will not utilise the error-correction capability.

DDR5 4800 speed with ECC and 1.1 V

The PC5-38400 rating confirms 4800 MT/s transfer rate at 1.1 volts. This single specification determines whether the module matches the memory controller requirements of the target system. Verify platform support for DDR5 4800 ECC UDIMM before purchase.

Priekšrocības

  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

Specifikācijas

BrandNEMIX RAM
ModelPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Jautājumi par šo preci

Will this 288-pin DDR5 UDIMM fit my motherboard's memory slots?

This module uses the standard 288-pin DDR5 UDIMM form factor. It fits any desktop or workstation board with DDR5 UDIMM slots keyed for 1.1 V operation.

What is the correct way to seat this 1Rx8 ECC module so the system recognises all 16 GB?

Align the notch with the slot key, press straight down until both retention clips click. A common error is stopping at the first click; both clips must latch to make full contact.

When should I plan to replace this DDR5 4800 ECC UDIMM?

DDR5 modules have no moving parts and no scheduled replacement interval. Replace only if memory diagnostics report correctable ECC errors rising above the platform threshold or a module fails completely.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.