Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC UDIMM 1Rx8 1.1V

SKU CH-4Y15-YBTA5

16GB DDR5 4800 ECC unbuffered UDIMM with 1Rx8 organisation, CAS 40 latency and 1.1V operation

  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • Rank1Rx8
  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

NEMIX RAM 16GB DDR5 4800 ECC UDIMM

This 16 GB unbuffered DIMM runs at DDR5 4800 with CAS 40 latency and 1.1 V operation. It provides error-correcting code protection for data integrity in compatible platforms. The module uses a single-rank 1Rx8 organisation based on major OEM DRAM chips.

Suits servers and workstations needing DDR5 4800

Systems that require registered or load-reduced DIMMs cannot use this unbuffered module. Builders targeting higher speeds or lower latencies than 4800 MT/s and CL40 should look at alternative specifications. Non-ECC platforms will not utilise the error-correction capability.

DDR5 4800 speed with ECC and 1.1 V

The PC5-38400 rating confirms 4800 MT/s transfer rate at 1.1 volts. This single specification determines whether the module matches the memory controller requirements of the target system. Verify platform support for DDR5 4800 ECC UDIMM before purchase.

Prednosti

  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

Špecifikácie

BrandNEMIX RAM
ModelPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Otázky k tomuto produktu

Will this 288-pin DDR5 UDIMM fit my motherboard's memory slots?

This module uses the standard 288-pin DDR5 UDIMM form factor. It fits any desktop or workstation board with DDR5 UDIMM slots keyed for 1.1 V operation.

What is the correct way to seat this 1Rx8 ECC module so the system recognises all 16 GB?

Align the notch with the slot key, press straight down until both retention clips click. A common error is stopping at the first click; both clips must latch to make full contact.

When should I plan to replace this DDR5 4800 ECC UDIMM?

DDR5 modules have no moving parts and no scheduled replacement interval. Replace only if memory diagnostics report correctable ECC errors rising above the platform threshold or a module fails completely.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.