Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Twelve green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM 192GB 12x16GB DDR5 6400 CL52 1.1V ECC RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-Y5N3-NAZ02

A 192 GB DDR5 ECC registered DIMM kit of twelve 16 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the GIGABYTE MZ33-CP1 motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 12X16GB

Skatīt vēl 24 konfigurācijas
  • 192 GB total capacity from twelve 16 GB modules
  • DDR5 6400 speed with CL52 latency at 1.10 V
  • Registered ECC RDIMM for error correction and signal integrity
  • 288-pin form factor matches GIGABYTE MZ33-CP1 slot requirements
  • Built with major OEM chips from Samsung Micron or Hynix

Targeted Server Upgrade

This 192GB kit contains 12 modules of 16GB each built as DDR5 6400 PC5-51200 ECC Registered RDIMMs. It is made for the GIGABYTE MZ33-CP1 motherboard where the 288-pin registered form factor and 1Rx8 rank layout match the board's population rules. The CL52 timing and 1.10V voltage match the controller expectations so the full capacity is recognised at rated speed.

Thermals and Power

Modules run at 1.10V without heat spreaders so power draw per DIMM stays low in normal server workloads. Registered buffering reduces electrical load on the memory controller allowing all 12 slots to operate together at full speed. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots during sustained operation.

Upgrade Context

The kit replaces smaller or slower DDR5 RDIMM sets that limit total capacity or run at lower data rates. The jump is worth it when your workload needs the full 192GB at 6400 MT/s with registered ECC stability. Buyers who need a different form factor such as UDIMM or SODIMM or who require a voltage other than 1.10V cannot use this kit.

Priekšrocības

  • 192 GB total capacity from twelve 16 GB modules
  • DDR5 6400 speed with CL52 latency at 1.10 V
  • Registered ECC RDIMM for error correction and signal integrity
  • 288-pin form factor matches GIGABYTE MZ33-CP1 slot requirements
  • Built with major OEM chips from Samsung Micron or Hynix

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 12x16GB DDR5 RDIMM kit on the GIGABYTE MZ33-CP1, and which step is commonly missed?

Follow the motherboard manual for the exact DIMM population order; the step often missed is seating all 12 modules in the correct sequence so the memory controller recognises the full 192GB at DDR5-6400.

What maintenance or replacement will the 1Rx8 ECC RDIMM modules need over their service life?

No scheduled maintenance is required; ECC corrects single-bit errors automatically, and the lifetime replacement warranty covers any module that fails while in service.

What limit appears first when the 192GB kit runs sustained workloads at 6400MHz and 1.1V?

The DDR5-6400 CL52 specification is the rated ceiling; sustained operation stays within the 1.10V JEDEC voltage, so thermal or timing limits are reached only if the platform cannot maintain the rated speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.