BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277467BTC
Krājumā
NEMIX RAM
NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 1.1V ECC RDIMM THINKMATE TWX-QS8-14E4|TWX-QS8-24E4 memory upgrade
A 256GB DDR5 4800 kit of sixteen 16GB ECC RDIMMs at CL40 and 1.1V for THINKMATE TWX-QS8 servers
- Capacity256GB (16 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB capacity across 16 modules supports heavy server workloads
- DDR5 4800 speed with CL40 latency delivers high-throughput data access
- ECC registered design detects and corrects memory errors for reliability
- 10 V operating voltage reduces power draw in dense configurations
- Validated for ThinkMate TWX-QS8-14E4 and TWX-QS8-24E4 tower servers
256GB DDR5 ECC RDIMM kit for Thinkmate servers
This 256GB kit contains sixteen 16GB DDR5 4800 registered DIMMs built with ECC for Thinkmate TWX-QS8-14E4 and TWX-QS8-24E4 tower servers. The modules run at 1.1V with CL40 latency and use a 1Rx8 organisation on major OEM Samsung, Micron or Hynix chips. It targets administrators who need maximum registered capacity in these qualified platforms.
Replaces lower-capacity or slower DDR5 RDIMMs
The upgrade is worthwhile when the workload exceeds the current memory ceiling or when error correction is absent. Moving from smaller registered kits or non-ECC memory adds both capacity and data integrity for virtualisation, database or compute tasks. Systems already populated with 4800 CL40 RDIMMs gain no latency improvement from this kit.
Sustained-load behaviour with registered ECC
Registered buffering and on-die ECC keep signal integrity stable during continuous multi-threaded operation. The 1.1V operating point limits thermal pressure across all sixteen slots. Without a heat spreader, airflow through the server chassis remains the primary cooling path for extended duty cycles.
Priekšrocības
- 256 GB capacity across 16 modules supports heavy server workloads
- DDR5 4800 speed with CL40 latency delivers high-throughput data access
- ECC registered design detects and corrects memory errors for reliability
- 10 V operating voltage reduces power draw in dense configurations
- Validated for ThinkMate TWX-QS8-14E4 and TWX-QS8-24E4 tower servers
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Jautājumi par šo preci
Will these 288-pin DDR5 modules fit the memory slots on my THINKMATE TWX-QS8-14E4 or TWX-QS8-24E4 tower server?
Yes, the kit is built as 288-pin DDR5 RDIMMs specifically validated for the THINKMATE TWX-QS8-14E4 and TWX-QS8-24E4 tower servers.
What is the correct order for populating the 16 registered DIMMs during installation?
Follow the server manual's channel population sequence; registered DIMMs must be installed in the prescribed slot order per CPU to initialise correctly.
Do the Samsung, Micron or Hynix chips on these modules require any firmware updates or periodic replacement?
No firmware updates are needed for the DRAM chips; the modules carry a lifetime replacement warranty if a defect ever appears.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
