SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501144BTC
Krājumā
NEMIX RAM
NEMIX RAM 256GB (4x64GB) DDR5 6400MHz CL52 ECC RDIMM memory upgrade
256 GB DDR5 ECC RDIMM kit at 6400 MHz with CL52 latency for Supermicro servers
- Capacity256GB (4 x 64GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 256 GB total capacity for memory-intensive server workloads
- DDR5 6400 MHz speed for high-throughput data processing
- ECC registered design detects and corrects single-bit errors
- 10 V operating voltage reduces power draw in dense configurations
- Validated for Supermicro X14SBW-TF motherboard compatibility
256GB DDR5 ECC RDIMM kit
This NEMIX RAM kit supplies 256GB across four 64GB DDR5 modules rated at 6400MHz with CL52 latency. Registered ECC design and 1.10V operation target stability in compatible Supermicro server platforms. The 288-pin RDIMM form factor uses major OEM Samsung, Micron or Hynix chips in a 4Rx4 organisation.
Suited for Supermicro X14SBW-TF upgrades
Builders expanding memory on the named Supermicro board gain registered ECC capacity with validated compatibility. Systems requiring unbuffered DIMMs, non-ECC modules or lower-density kits should select a different product. Workloads that exceed 256GB per channel or need heat spreaders will also need an alternative.
256GB total capacity headroom
Four 64GB modules fill four slots and deliver 256GB of registered ECC memory for virtualisation, database or AI inference tasks. The kit runs out when the platform demands more than 256GB in this configuration or when thermal design requires integrated spreaders. Additional capacity requires a motherboard with more slots or higher-density modules.
Priekšrocības
- 256 GB total capacity for memory-intensive server workloads
- DDR5 6400 MHz speed for high-throughput data processing
- ECC registered design detects and corrects single-bit errors
- 10 V operating voltage reduces power draw in dense configurations
- Validated for Supermicro X14SBW-TF motherboard compatibility
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | Supermicro Compatible Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server RAM |
| Part Number | MR51200-944K4 |
| Capacity | 256GB (4 x 64GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB (4 x 64GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Will this 256GB DDR5 ECC RDIMM kit work in my Supermicro X14SBW-TF motherboard?
Yes, the kit is validated for the Supermicro X14SBW-TF platform and ships as a matched set of four 64GB registered DIMMs.
Can I mix these 6400MHz CL52 modules with slower DDR5 RDIMMs already installed?
The motherboard will run all installed DDR5 RDIMMs at the speed and latency of the slowest module present.
How do I verify the 256GB kit is running at 6400MHz with ECC active after installation?
Check the memory speed and ECC status in the BIOS setup or use a tool such as dmidecode to confirm 6400MHz operation and error-correction enabled.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
