Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 6400MHz CL52 ECC RDIMM memory upgrade

SKU CH-RKAS-G6FQ8

256 GB DDR5 ECC RDIMM kit at 6400 MHz with CL52 latency for Supermicro servers

  • Capacity256GB (4 x 64GB)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 256 GB total capacity for memory-intensive server workloads
  • DDR5 6400 MHz speed for high-throughput data processing
  • ECC registered design detects and corrects single-bit errors
  • 10 V operating voltage reduces power draw in dense configurations
  • Validated for Supermicro X14SBW-TF motherboard compatibility

256GB DDR5 ECC RDIMM kit

This NEMIX RAM kit supplies 256GB across four 64GB DDR5 modules rated at 6400MHz with CL52 latency. Registered ECC design and 1.10V operation target stability in compatible Supermicro server platforms. The 288-pin RDIMM form factor uses major OEM Samsung, Micron or Hynix chips in a 4Rx4 organisation.

Suited for Supermicro X14SBW-TF upgrades

Builders expanding memory on the named Supermicro board gain registered ECC capacity with validated compatibility. Systems requiring unbuffered DIMMs, non-ECC modules or lower-density kits should select a different product. Workloads that exceed 256GB per channel or need heat spreaders will also need an alternative.

256GB total capacity headroom

Four 64GB modules fill four slots and deliver 256GB of registered ECC memory for virtualisation, database or AI inference tasks. The kit runs out when the platform demands more than 256GB in this configuration or when thermal design requires integrated spreaders. Additional capacity requires a motherboard with more slots or higher-density modules.

Points forts

  • 256 GB total capacity for memory-intensive server workloads
  • DDR5 6400 MHz speed for high-throughput data processing
  • ECC registered design detects and corrects single-bit errors
  • 10 V operating voltage reduces power draw in dense configurations
  • Validated for Supermicro X14SBW-TF motherboard compatibility

Caractéristiques

BrandNEMIX RAM
SeriesSupermicro Compatible Series Server Memory
ModelDDR5 ECC RDIMM Registered Server RAM
Part NumberMR51200-944K4
Capacity256GB (4 x 64GB)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB (4 x 64GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions sur cet article

Will this 256GB DDR5 ECC RDIMM kit work in my Supermicro X14SBW-TF motherboard?

Yes, the kit is validated for the Supermicro X14SBW-TF platform and ships as a matched set of four 64GB registered DIMMs.

Can I mix these 6400MHz CL52 modules with slower DDR5 RDIMMs already installed?

The motherboard will run all installed DDR5 RDIMMs at the speed and latency of the slowest module present.

How do I verify the 256GB kit is running at 6400MHz with ECC active after installation?

Check the memory speed and ECC status in the BIOS setup or use a tool such as dmidecode to confirm 6400MHz operation and error-correction enabled.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.