BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278445BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.10V UDIMM MD44800-618K2 memory upgrade
A 32 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency and 1.10 V operation for MSI B650 motherboards
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity with two 16 GB modules
- DDR5 5600 speed rated at PC5-44800
- CL46 CAS latency for responsive timing
- 10 V operating voltage for efficient power use
- 288-pin UDIMM form factor fits desktop boards
32 GB DDR5 Kit for MSI B650 Boards
This 32 GB kit contains two 16 GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 latency. It is built for desktop PCs using the MSI MAG B650 Tomahawk WiFi motherboard and suits builders who want a straightforward memory upgrade without overclocking.
Unbuffered 288-Pin Modules Without Heat Spreader
Each stick is a 1Rx8 non-ECC unbuffered DIMM running at 1.10 V. The plain 288-pin PCB fits standard DDR5 slots and leaves maximum clearance for large CPU coolers, though the lack of a heat spreader means airflow over the chips relies entirely on case ventilation.
Standard Voltage Operation at 1.10 V
At the stock 1.10 V the modules draw typical DDR5 power and run within JEDEC thermal limits. Without a spreader the DRAM temperature follows case airflow, so a well-ventilated chassis keeps noise low; no extra voltage or active cooling is required for rated speed.
Priekšrocības
- 32 GB capacity with two 16 GB modules
- DDR5 5600 speed rated at PC5-44800
- CL46 CAS latency for responsive timing
- 10 V operating voltage for efficient power use
- 288-pin UDIMM form factor fits desktop boards
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | MSI Gaming Motherboard Compatible Series Memory |
| Model | MSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MSI |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
What practical speed does the DDR5 5600 interface deliver on this kit?
The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, giving 5600 MT/s throughput on a compatible board.
What physical slot and clearance does the 288-pin UDIMM need on the MSI MAG B650 Tomahawk WiFi?
Each 16 GB stick is a standard 288-pin DDR5 UDIMM without a heat spreader, so it fits any full-size DDR5 DIMM slot with normal CPU-cooler clearance.
How are the two 16 GB modules installed, and what step do builders often miss?
Insert both sticks into the motherboard's recommended DDR5 slots (usually A2 and B2), press until the retention clips click, then enable the 5600 MT/s profile in BIOS so the kit runs at its rated speed.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
